The 46/50 offers simple, direct connection of two microphones and six music sources which can be routed to feed four different output zones with up to 50W of clean audio power. The 46/50's music programme and level can be controlled remotely. A paging facility is available with the optional CDPM paging mic. So, if a simple one-box solution is required for a four zone venue, look no further than the Cloud 46/50.
4 zone mixer/amplifier
4 x 50W with dynamic clip limiters on every zone
Mic 1 priority over Mic 2
Line 6 input priority (zone 1 only) with adjustable release time
6 line inputs, 2 mic inputs with voice operated priority over the music
Music level and source selection with remote control RSL-6 (or RL-1 -level only)
Facility input (zone 1 only) for active modules DM-1 and LM-1
Amplifier link feature when used on 2 zone or 3 zone systems
Dedicated CDPM paging mic with chime available
Optional equaliser modules for Bose loudspeakers can be fitted to any zone
Utility output
Optional 4 x 70W 100V or 70V internal module (CXL-4160)
Remote music mute for Fire Alarm interface
Installer settings behind an anti-tamper panel
Forced cooling by vari-speed fan
Amplifier Signal Type - Audio
Amplifier Type - Mixer Amplifier
Cooling:
Variable speed DC fan
Depth:
320.30 mm
Distortion:
<0.05% 20Hz - 20kHz
Frequency Response:
-3dB 100Hz (filter) ±0.5dB 20kHz
Gain Range:
10 to 50 dB
Headroom:
>20 dB
Height:
88 mm
Input Impedance:
47 kohms
Line Inputs:
Microphone Inputs:
Noise:
-90dB rms 22Hz - 22kHz (0dB gain)
Noise:
-126dB EIN 22Hz-22kHz (150Ω)
Maximum Frequency Response (Bandwidth):
20 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Minimum Frequency Response (Bandwidth):
20 Hz
Minimum Frequency Response (Bandwidth):
0.02 kHz
Number of Channels:
4
Number of Inputs:
6
Rack Units (Height):
2
Total Harmonic Distortion + Noise (THD+N):
0.05 %
Width:
482.60 mm
Product Weight:
6.15 kg
Sensitivity:
0dBu – 775mV
Input Gain Range:
20 dB
Equalisation:
HF ±10dB @ 10kHz
LF ±10dB @ 50Hz
CMR:
>70dB@1kHz typical
Outputs:
Speaker Outputs:
50Watts rms/4W 35Watts rms/8ohms via phoenix type connector
Line outputs (zones 1 & 2 only):
0dBu (775mV) rms via RCA phono connectors
100V line output:
100volts balanced – 250ohms min load (optional module)
70/100V line output:
70volts balanced – 125ohms min load (optional module)
Protection:
Dynamic clip limiting, DC offset, Thermal & switch-on delay