The 300 Clip Instant Access System consists of the ST300-SSM VTR Controller, STS420 Shotbox and Shotlist Software. The ST300 controls up to 3 video channels individually or ganged. SHOTLIST provides fast access to existing video clips stored on Grass Valley Group’s PROFILE, other DDR, VDR or Video Server supporting Louth Protocol. The SHOTLIST contains up to 300 CLIP IDs, stored in non-volatile memory in the ST300. Any clip in the SHOTLIST can be quickly loaded by simply entering the associated 3-digit number of its location, then pressing [LOAD]. Press [PLAY] to play the clip. Press [RECUE] to recue to the beginning of the clip or to the "recalled" time if defined.
- NOW, production switchers can load & play video clips on Grass Valley Group PROFILE and other video servers
- Use the EMEM or SNAPSHOT Learn & Recall functions of the production switcher to load and play a video clip from a Recall or timeline
- Use the Run and Trigger functions of the production switcher to Play, Stop or Recue the video clip
- Instantly load a video clip at the press of a button
- Instantly load a FILL clip & KEY clip at the press of ONE button, then play out both channels in sync
- Throughout this manual, VTR, DDR, VDR & Video Server will be referred to collectively as "Video Server"
- The ST300-S/SM is referred to as the ST300
- The ST420 SHOTBOX is referred to as "SHOTBOX"
- SHOTKEY refers to the 1-30 switches on the SHOTBOX
- Words surrounded by brackets, for example, [ENTER], are keys on the ST300 or the SHOTBOX
- XXX] + [XXX] means hold the two keys down simultaneously
