The Hall Research VSA-HA-DP is a member of the VSA wall plate input modules. It is designed to connect to a VSA-51 receiver using 2 Cat5e/6 cables and is powered by the receiver (no additional power supply needed). The VSA-HA-DP provides the means to extend DVI or HDMI signals to the receiver and is able to extract the embedded audio from the HDMI video input for the audio amplifier in the VSA-51 receiver. It can also accommodate a separate audio input though the 3.5mm stereo jack provided
Supports DVI, HDMI™, HDCP, CEC, Deep-Color and 3D video
Connects to the VSA receiver using 2 Cat5e/6 cables
Can be located 130 ft (40m) away from the VSA receiver
Powered by the receiver (no additional power supply needed)
Extracts embedded audio from HDMI™ for the audio amplifier in the receiver
Provides a separate audio input though a 3.5mm stereo jack
USB port for configuration and management of EDID
Free Windows™ GUI software to set the modes of operation and manage the EDID
Can pass-thru or emulate EDID
Supports HDCP, HDMI deep-color and 3D
Gang Number - One
Plate Types - Plates With Connectors (Built In)
Warranty - Yes
Certifications:
CE, FCC
Depth:
44.96 mm
Height:
102.11 mm
Width:
35 mm
Warranty (Length/Type):
2 Years
POWER SUPPLY:
Powered from VSA-51-R
Operating Temperature:
32 to 104 DegF (0 to 40 DegC)
Storage Temperature:
-40 to 185 DegF (-40 to 85 DegC)
Humidity:
10 to 90% non-condensing
MTBF:
90,000 hours
USB:
2.0 full speed
UTP cable functions:
video (TDMS) on port “A”, power, audio, DDC on Port “B”