HDMI-3D-OPT-TX210RAK extends HDMI 1.4 and bi-directional RS-232 signals over one multimode fiber and transmit video signal with embedded audio to a distance of up to 2500meters.
1920x1080 at 120Hz/4:4:4, 4096x2048 at 30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
HDCP enable/disable function on input
HDCP 1.4 compliant
Bi-directional RS-232 extension (pass-through and control)
Uncompressed video up to 9Gbps datarate (300MHz pixel clock)
No signal latency, zero frame delay
Extends HDMI 1.4, USB KVM and RS-232 signals over one multimode fiber cable
Adjustable analog audio settings (volume, gain, balance)
Single Fiber Technology
USB KVM (HID) extension
Audio embedding from 3.5mm jack or 5pole balanced Phoenix connector
Dual output with built-in distribution amplifier
Firmware upgrade through USB
Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
Extension distance up to 2500meters (with OM3 fiber, 1920x1080p60)
Cross compatible with OPT series Lightware fiber extenders and I/O boards
Advanced EDID Management
Pixel Accurate Reclocking
Intuitive control software for device configuration
Device control via RS-232 and USB
Supports HDMI 4K signal formats (4K UHD at 30Hz RGB 4:4:4 or at 60Hz YUV 4:2:0, up to 9Gbps)
No video compression
Built-in video test pattern generator
Local monitor buffered output on transmitter
Twist-and-lock DC power connector
Status LEDs (fiber link, signal and HDCP detect)
Frame Detector (analyze detailed video timings)
External universal power adaptor
5-pole Phoenix balanced analog audio connectors
3,5mm audio jack input
Mounting options for rack, furniture or truss
Built-in Event Manager automation feature
Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)