The 1201-MV is a universal switcher that supports 4Kx2K@60Hz 4:4:4, flexible multiview modes, and six video inputs: five HDMI, and one powered USB-C. The HDMI output can be configured to mirror the HDBaseT output or preview the HDMI 1 input. The HDBaseT output can travel up to 328 feet (100m) without any additional amplification, and supports PoC for remotely powering the receiver. The 1201-MV also features automatic source detection & switching, can power displays on and off using CEC or RS232, and offers versatile multiview for showing up to four sources onscreen simultaneously. The universal switcher can extend USB signals—such as cameras and microphones—from the far-end hub, making them available to the system PC or a connected laptop. The 1201-MV is available with or without its hub/receiver.
- Video:
- 5 HDMI inputs & 1 USB-C input with 60W charging
- EDID settings for all inputs – Default is 1080P/60
- Supports an Auto-Switching mode with automatic display power
- Supports HDMI output resolutions up to 4Kx2K @ 60Hz 4:4:4
- Supports HDBaseT output resolutions up to 4Kx2K @ 60Hz 4:2:0
- Default output resolution is 1080P/60
- 12 flexible multiview configurations for showing up to 4 sources at once
- Breakaway HDMI output can preview the HDMI 1 input or mirror the HDBaseT output
- Audio:
- Independent audio input selection during Multiview operation
- Supports both source and mic levels
- Mic with phantom power selection
- Line input for mic mixing
- Control:
- Controllable via RS232, IR remote, front panel buttons, or TCP/IP commands
- RS232 and TCP/IP use a unique, easy-to-use ASCII protocol
- Two RS232 control modes:
- o Control of the switcher from both the switcher and hub/receiver (Default)
- o Sending RS232 display commands with baud rate setting to the hub/receiver
- Supports sending TEVOX Macro commands for TekMonitor control
- CEC control of displays and receivers
- User-defined CEC commands
- RS232 Command entry for display power
- Bridge LAN network allows for single network connection to switcher and 3rd party devices at hub/receiver
- Selectable power on and off of the POC control for the hub/receiver
- USB:
- Supports bidirectional USB 3.0 simulated hub extension at switcher and hub/receiver
- Automatic bridging of USB hub to USB-C input
- Provides PC or connected laptop access to far-end USB devices (cameras, microphones, etc)
