hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Home Technology/Automation
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
Flag
EnglishFrenchGermanItalianPortugueseSpanish
Gilderfluke & Company, Inc. - Br-CC08

1-slot Enclosed Card Cage

Model: Br-CC08

  • Single-slot card cage
  • Used to enclose and protect a single brick card
  • Provides better physical protection for the card for a more industrial look than our other open frame single card cages
  • Can be mounted in electrical enclosure using screws, 2-3/4" snap-track or on standard DIN rails (with the addition of our DIN rail adapters)
  • Includes both screw terminal and ribbon cable connectors for I/O
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The Br-CC08 card cage is a single slot card cage which is used to enclose and protect a single ‘Brick’ card.

It provides better physical protection for the card for a more ‘industrial’ look than our other open frame single card cages.

The Br-CC08 can be mounted in your electrical enclosure using screws, 2-3/4" Snap-Track, or on standard DIN rails (with the addition of our DIN rail adapters). It mounts either horizontally or vertically, and includes both screw terminal and ribbon cable connectors for I/O, as well as SMPTE and secondary serial port connections for the new Br-Brain4 cards. Power, DMX-512 and network connections are available on both sides of the cage, to make daisy chaining multiple card cages a snap. Holes allow you to pull-tie down your Bricks in the cage for high vibration installations.

Animation equipment which can be mounted in the Br-CC08 include:

  • Br-ANA: Sixteen 0-10 volt analog outputs plus DMX-512 output Brick. The Br-ANA can be used as a ‘Smart’ or ‘Dumb’ Brick. RealTime data is sent to the Br-ANA through its RS-422 serial port or DMX-512 port. Shows can be permanently downloaded and stored in the Br-ANA's flash memory through the RS-422 serial port.
  • Br-MultiBrick32: Thirty-two digital output ‘Brick’. It can be used as a ‘Smart’ or ‘Dumb’ Brick. RealTime data is sent to the Br-MultiBrick32 through its RS-422 serial port or DMX-512 port. Shows can be permanently downloaded and stored in the Br-MultiBrick32's flash memory through the RS-422 serial port. Outputs are individually self-protected to make them nearly impossible to blow out.
  • Br-EFB: Closed Feedback Loop Smart Brick. Four or Eight channels of control are available. RealTime data is sent to the Br-EFB through its RS-422 serial port or DMX-512 port. Shows can be permanently downloaded and stored in the Br-EFB's flash memory through the RS-422 serial port.
  • Br-ZBR: Z-Buss output cards which each adds thirty-two digital outputs to a Br-ANA or Br-EFB through the Z-Buss connection, or receives DMX-512 data directly. Outputs are individually self-protected to make them nearly impossible to blow out. The Z-Brick has no onboard show storage.
  • Single-slot card cage
  • Used to enclose and protect a single brick card
  • Provides better physical protection for the card for a more industrial look than our other open frame single card cages
  • Can be mounted in electrical enclosure using screws, 2-3/4" snap-track or on standard DIN rails (with the addition of our DIN rail adapters)
  • Includes both screw terminal and ribbon cable connectors for I/O
  • Power, DMX-512 and network connections are available on both sides of the cage, to make daisy chaining multiple card cages a snap
  • Holes allow to pull-tie down bricks in the cage for high vibration installations
  • Includes:
    • Br-CC08 sticky labels for card cage screw terminals
    • Gilder CD with software and manuals
 
 

Suggested Products