4K HDMI Extender over CAT5e/CAT6

Model: ALF-EXT60IR18G

Supports HDMI 2.0, up to 4K at 60Hz 4:4:4, HDR 10, 18G, HDCP 2.2,
Extends 4K or 1080p HDMI signal up to 230 feet (70m) over a single CAT5e/6 cable.
HDMI loop out on transmitter.
Bi-directional IR pass-through.
Supports video resolution down-scaling, the 4K input can be automatically degraded to 1080p output on receiver for compatibility with legacy 1080p display device.

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The EXT60IR-18G is a cost-effective point-to-point extender set for HDMI 2.0 and IR signals. This kit supports 4K/UHD video at 60 Hz with 4:4:4 Chroma sampling, as well as HDMI data rates up to 18 Gbps, HDCP 2.2 compliant and HDR. It provides HDMI transmission up to 230 ft (70 m) for 4K at 60Hz 4:4:4 and 1080p, over single CAT5e/6 cable. It supports video resolution down-scaling, the 4K input can be automatically downscale to 1080p output for compatibility with 1080p display.

Supports HDMI 2.0, up to 4K at 60Hz 4:4:4, HDR 10, 18G, HDCP 2.2,
Extends 4K or 1080p HDMI signal up to 230 feet (70m) over a single CAT5e/6 cable.
HDMI loop out on transmitter.
Bi-directional IR pass-through.
Supports video resolution down-scaling, the 4K input can be automatically degraded to 1080p output on receiver for compatibility with legacy 1080p display device.
Features visually lossless compression with no latency.
EDID pass-through.
Compact design, easy to install and simple to operate.

Extender Type - HDMI
HDBaseT - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 55 C
Operating Temperature (Minimum): -5 C
Transmission Range: 7010.40 cm
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 4 Watt
Current Draw: 1 Amps
DC Voltage: 12 Volts
Depth: 80 mm
Height: 16.80 mm
Width: 80 mm
Product Weight: 0.01 kg
Video Resolution: Up to 4K at 60Hz 4:4:4, HDR
Transmission Distance: 4K/1080p < 70m
HDMI Standard: HDMI 2.0; HDCP 2.2 compliant
EDID Management: BUILT-IN EDID
Relative Humility: 10% - 90%
Transmitter:
•Input: 1 x HDMI
•Input Connector: 1x 19-pin type-A female HDMI
•Output: 1x HDMI; 1 HDBaseT
•Output Connector: 1x 19-pin type-A female HDMI; 1 RJ45
•Control: 1x IR IN; 1 IR OUT
•Control Connector: 2x 3.5mm mini jacks
Receiver:
•Input: 1x HDBaseT
•Input Connector: 1x RJ45
•Output: 1x HDMI
•Output Connector: 1x 19-pin type-A female HDMI
•Control: 1x IR IN; 1 IR OUT
•Control Connector: 2x 3.5mm mini jacks

Extender 157794 kb - Data Sheet

Project List