Audio measurements can be made quickly and easily with Gold Line Audio Test Sets. The TS1RMX incorporates the three most commonly needed functions for calibration and alignment procedures in a standard rack mounted configuration with 3 pin XLR connectors. Included is a true sine wave oscillator allowing a full single range sweep from 20Hz to 20kHz, a dual use frequency counter and a wideband average responding AC voltmeter displayed as dB. The Low Distortion Oscillator: A current controlled, state-variable true sine wave oscillator incorporating a fast AGC circuit. Distortion components are typically 0.1% 2nd and 0.05% 3rd which are low order and not audible making the TS1 & TS2 useful in making listening tests where a function generator would generate undesirable, audible side effects. Full frequency sweeps can be made from 20Hz - 20kHz in a single range. These units have no amplitude changes over the entire frequency range. The Frequency Counter: The frequency counter is internally connected to the internal oscillator and displays the oscillator frequency until a signal is plugged into the input connector. It then displays the frequency of the input signal. This unique combination allows absolute precision in setting frequencies. The dB Meter: The dB meter is a wideband average responding AC voltmeter. The circuit output is converted to dB for display. Direct reading dB greatly simplifies alignment procedures.
Low Distortion Oscillator
Frequency Counter
DB Meter
Inputs - Electronically balanced XLRs mounted on both front and rear panels
Outputs - Electronically balanced XLRs mounted on both front and rear panels
Select between monitoring the Internal Oscillator at the Output
Connector or an External Signal at the Input Connector
Select between monitoring the front or rear panel connectors
Tester Format - Other
Spec Sheet available - Yes
AC Voltage:
115,220 Volts
Depth:
177.80 mm
Height:
44.45 mm
Width:
482.60 mm
Product Weight:
1.36 kg
Regulatory Compliance:
CE,FCC
Oscillator:
Frequency Range:
10 - 27K Hz
Accuracy:
±0.1Db From 20Hz - 20Khz
Impedance:
63.2W. (Balanced)
Adjustable Output Level:
-60Dbv To +24Dbv Ref (0.775V)
Maximum Output Level:
+24Dbv @ 2Kw Or Greater, +22Dbm @ 600W