120W Mixer Amplifier with 4 to 16 Ohm Output Constant Resistance
Model: EQ-AMP120
MIC input with front- and rear-panel connectors
100V and 70V constant-voltage speaker outputs and 4-16 ohm constant-resistance speaker output
Commercial-grade toroidal transformers produce high performance audio on a wide range of frequencies with minimal noise and high fidelity, even at high volume
Intelligent limiter can reduce excess signal
Reliable protection against overload, short circuit, and power fluctuation for optimum reliability
120W mixer amplifier, MIC input with front- and rear-panel connectors. 100V and 70V constant-voltage speaker outputs and 4-16 ohm constant-resistance speaker output. Commercial-grade toroidal transformers produce high performance audio on a wide range of frequencies with minimal noise and high fidelity, even at high volume. Intelligent limiter can reduce excess signal. Reliable protection against overload, short circuit, and power fluctuation for optimum reliability. Oversized heat sinks protect against overheating, protecting the amplifier’s working lif. Interrupt feature mutes AUX inputs when signal is detected on the MIC input -speed of restoration of AUX inputs may be adjusted from sharp to gradual. Phantom power available on mic input for condenser-type microphones.
MIC input with front- and rear-panel connectors
100V and 70V constant-voltage speaker outputs and 4-16 ohm constant-resistance speaker output
Commercial-grade toroidal transformers produce high performance audio on a wide range of frequencies with minimal noise and high fidelity, even at high volume
Intelligent limiter can reduce excess signal
Reliable protection against overload, short circuit, and power fluctuation for optimum reliability
Oversized heat sinks protect against overheating, protecting the amplifier’s working life
Interrupt feature mutes AUX inputs when signal is detected on the MIC input -speed of restoration of AUX inputs may be adjusted from sharp to gradual
Phantom power available on mic input for condenser-type microphones
Amplifier Signal Type - Audio
Amplifier Type - Mixer Amplifier
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
14 F
Maximum Frequency Response (Bandwidth):
15 kHz
Maximum Frequency Response (Bandwidth):
15000 Hz
Minimum Frequency Response (Bandwidth):
50 Hz
Minimum Frequency Response (Bandwidth):
0.05 kHz
Impedance:
15000 ohm
Sensitivity:
1 dBV
Total Harmonic Distortion + Noise (THD+N):
1 %
AC Voltage:
110 Volts
Active Power:
120 Watt
Peak Power:
200 Watt
Depth:
13.90 in
Height:
5.20 in
Width:
19.10 in
Product Weight:
25.78 lbs
Shipping Weight:
30.30 lbs
Distortion:
<1 %
Input Tone Control:
Bass: 100Hz, Treble: 10kHz at 12dB