20W mixer amplifier with MIC input with front- and rear-panel connectors. Rear-panel AUX 1 and AUX 2 inputs. Rear panel line-level output allows connection to another amplifier with 100V and 70V constant-voltage speaker outputs and 4-16 ohm constant-resistance speaker output. Commercial-grade toroidal transformers produce high performance audio on a wide range of frequencies with minimal noise and high fidelity, even at high volume. Intelligent limiter can reduce excess signal. Reliable protection against overload, short circuit and power fluctuation for optimum reliability. Oversized heat sinks protect against overheating, protecting the amplifier’s working life.
Three input jacks
Microphone interrupt circuit
Auxiliary input is muted
Separate bass and treble tone controls
Dual 110 to 120Vac or 12Vdc power inputs
Amplifier Signal Type - Audio
Amplifier Type - Mixer Amplifier
Warranty - Yes
Spec Sheet available - Yes
Warranty (Length/Type):
1 Year Limited
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
50 F
Maximum Frequency Response (Bandwidth):
18 kHz
Maximum Frequency Response (Bandwidth):
18000 Hz
Minimum Frequency Response (Bandwidth):
40 Hz
Minimum Frequency Response (Bandwidth):
0.04 kHz
Impedance:
20000 ohm
Number of Channels:
2
Sensitivity:
1 dBV
Signal to Noise Ratio:
90 dB
Total Harmonic Distortion + Noise (THD+N):
0.50 %
AC Voltage (Maximum):
120 Volts
AC Voltage (Minimum):
100 Volts
Active Power:
80 Watt
Depth:
11.42 in
Height:
3.46 in
Width:
14.17 in
Product Weight:
14.77 lbs
Shipping Weight:
17.42 lbs
Power Handling:
20 Watt
Output Power:
RMS 20W continuous/30W maximum
Output Voltage:
70 V
Inputs:
1.3 mV Aux/100mV Mic
Input Tone Control:
Bass: 100Hz, Treble: 10kHz at 12dB