40W Mixer Amplifier with 4 to 16 Ohm Output Constant Resistance
Model: EQ-AMP40W
MIC input with front- and rear-panel connectors
Rear-panel AUX1 and AUX 2 inputs
Rear panel line-level output allows connection to another amplifier
100V and 70V constant-voltage speaker outputs and 4-16 ohm constant-resistance speaker output
Commercial-grade toroidal transformers produce high performance audio on a wide range of frequencies with minimal noise and high fidelity, even at high volume
MIC input with front- and rear-panel connectors. Rear-panel AUX1 and AUX 2 inputs. Rear panel line-level output allows connection to another amplifier. 100V and 70V constant-voltage speaker outputs and 4-16 ohm constant-resistance speaker output. Commercial-grade toroidal transformers produce high performance audio on a wide range of frequencies with minimal noise and high fidelity, even at high volume. Intelligent limiter can reduce excess signal. Reliable protection against overload, short circuit, and power fluctuation for optimum reliability. Oversized heat sinks protect against overheating, protecting the amplifier’s working lif. Interrupt feature mutes AUX inputs when signal is detected on the MIC input -speed of restoration of AUX inputs may be adjusted from sharp to gradual. Phantom power available on mic input for condenser-type microphones.
MIC input with front- and rear-panel connectors
Rear-panel AUX1 and AUX 2 inputs
Rear panel line-level output allows connection to another amplifier
100V and 70V constant-voltage speaker outputs and 4-16 ohm constant-resistance speaker output
Commercial-grade toroidal transformers produce high performance audio on a wide range of frequencies with minimal noise and high fidelity, even at high volume
Intelligent limiter can reduce excess signal
Reliable protection against overload, short circuit, and power fluctuation for optimum reliability
Oversized heat sinks protect against overheating, protecting the amplifier’s working life
Interrupt feature mutes AUX inputs when signal is detected on the MIC input -speed of restoration of AUX inputs may be adjusted from sharp to gradual
Phantom power available on mic input for condenser-type microphones
Amplifier Signal Type - Audio
Amplifier Type - Mixer Amplifier
Warranty - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
14 F
Maximum Frequency Response (Bandwidth):
18 kHz
Maximum Frequency Response (Bandwidth):
18000 Hz
Minimum Frequency Response (Bandwidth):
40 Hz
Minimum Frequency Response (Bandwidth):
0.04 kHz
Impedance:
20000 ohm
Number of Channels:
2
Sensitivity:
1 dBV
Signal to Noise Ratio:
90 dB
Total Harmonic Distortion + Noise (THD+N):
0.50 %
AC Voltage (Maximum):
120 Volts
AC Voltage (Minimum):
100 Volts
Active Power:
80 Watt
Depth:
11.42 in
Height:
3.46 in
Width:
14.17 in
Product Weight:
14.77 lbs
Shipping Weight:
17.42 lbs
Warranty (Length/Type):
1 Year Limited
Line Level Output:
-10 dBV/3kOhms
AUX Level Input:
300 mV/10kohms
Cooling Mode:
Air Cooling
Input Tone Control:
Bass: 100Hz, Treble: 10kHz at 12dB