The SQ-MUX-2131 is a SDI and stereo audio multiplexer. It is designed for Sequoia Signal Processing Platform. The SQ-MUX-2131 embeds stereo audio quantified by 24bits into the input SDI signal (SMPTE 259M-C, 270Mb/s, 525/625 component). Any one of the 16 channels can be selected for embedding. It provides two CVBS monitoring outputs with optional overlaid audio meter and two SDI outputs. Input auto cable equalizing is up to 1000ft (about 300m). LED indicator on module edge shows the status information of signals, and the ADJ switch can adjust the parameters manually. Module with independent rear panel can be used in Sequoia 1RU or 2RU frame. The SQ-MUX-2131 supports the function of network monitoring of Sequoia series platform. The module can be controlled and monitored via Sequoia network control module and SQ-MASTER platform control software.
Supports SMPTE 259M-C, 525/625 component inputs
Supports SMPTE 272M
16 optional channels for embedding
Balanced or unbalanced audio input
One by-pass protected SDI output
Two CVBS monitoring outputs with optional audio meter
Auto cable equalization up to 1000ft (about 300m)
Non-volatile memory
Hot-swappable
Supports centralized control via PC
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
Maximum Frequency Response (Bandwidth):
20 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Minimum Frequency Response (Bandwidth):
20 Hz
Minimum Frequency Response (Bandwidth):
0.02 kHz
Input Impedance:
75 ohm
Number of Audio Channels:
16
Number of Inputs:
3
Number of Outputs:
2
Output Impedance:
75 ohm
Quantization:
8 bit
Signal to Noise Ratio:
70 dB
Active Power:
7 Watt
Rack Units (Height):
1 or 2
SQ-MASTER
- SEQUOIA Series Platform Control Software