HCE-102TX is a conversion transmitter that converts HDMI signals into CAT5e/6 signals and distributes up to two. It supports 4K video, supports RS-232C, 100BASE-TX Ethernet superimposition, and can extend up to 150 m. RS-232C allows bidirectional communication with output 1 or simultaneous unidirectional communication with 2 outputs. Ethernet can communicate between the input and all two outputs. Equipped with EDID emulation function. In addition to the 15 built-in resolutions, you can use a copy of the EDID of the output 1 connected sink device. Low latency up to 10 us at 100 m.
- A conversion transmitter that converts and distributes HDMI signals to CAT5e/6 signals.
- An HDMI signal extension/distribution system can be configured with the HCD-104 or CRO-HE25RX.
- It supports HDCP 1.4/2.2.
- CEC is pass-through between input and output 1, HEC and ARC are not supported.
- It supports 4K at 30p (4:4:4) / 4K at 60p (4:2:0) and can extend up to 70m.
- Signals up to 1080 at 60p (24bit) can be extended up to 150m using long reach mode.
- For RS-232C communication, you can select bidirectional communication between input and output 1 or simultaneous unidirectional transmission from input to output 1 to 2.
- Ethernet can communicate between the LAN terminal and all two CAT5e/6 outputs.
- Equipped with EDID emulator function. You can use 15 built-in resolutions or a copy of the output device.
- There is an HDMI active through output.
- The attached power cable has a lock mechanism.
