Mixer Pre-amplifier, 7 Channels, Rackmount Kit

Model: MIX2

Mute switch allows Channel 1 (MIC or AUX input) to mute all other channels, or Channels 1-6 to mute Channel 7 (AUX only) input
Post-master volume control outputs: Balanced line level output at Phoenix connector, Balanced MIC level output at Phoenix connector, Unbalanced main output at dual parallel RCA jacks
Pre-master volume control tape output at dual parallel RCA jacks
Low cut filter switch can reduce bass response in reverberant spaces (like gyms) and act as a horn protection filter (trumpet protection) when paging horns are used
Includes rack mounting brackets

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The MIX2 mixer/pre-amplifier features six channels, each with a microphone input at a removable Phoenix connector, and an AUX input at an RCA jack. A seventh channel (AUX only) has a front panel switch to select one of two rear panel AUX input jacks.

Mute switch allows Channel 1 (MIC or AUX input) to mute all other channels, or Channels 1-6 to mute Channel 7 (AUX only) input
Post-master volume control outputs: Balanced line level output at Phoenix connector, Balanced MIC level output at Phoenix connector, Unbalanced main output at dual parallel RCA jacks
Pre-master volume control tape output at dual parallel RCA jacks
Low cut filter switch can reduce bass response in reverberant spaces (like gyms) and act as a horn protection filter (trumpet protection) when paging horns are used
Includes rack mounting brackets

Spec Sheet available - Yes

Input Channels 1-6: Microphone Inputs – balanced Phoenix connectors: 1mV (to reach 0dB 775mV output), 600 ohms AUX Inputs – unbalanced RCA connectors: 140mV (to reach 0dB 775mV output), 24kohms
Input Channel 7: AUX Inputs – Switchable on front panel – RCA jack "A" or RCA jack "B" 100mV (to reach 0dB 775mV output), 28kohms
Outputs: Main Output – Unbalanced parallel RCA jacks 775mV, 280ohms; Line Output – Balanced 775mV, 600 ohms and MIC Output – 7mV, 50 ohms both on removable Phoenix connector; Tape Output – Unbalanced parallel RCA jacks 75mV, 280ohms
Frequency Response: 20Hz–20kHz ±1dB
Signal to noise ratio: MIC 60dB AUX 65dB (from 0dB output level), Total Harmonic Distorion: <=.05%
AC Voltage (Maximum): 230 Volts
AC Voltage (Minimum): 115 Volts
Active Power: 5 Watt
Depth: 9.88 in
Height: 1.80 in
Width: 19 in
Product Weight: 7 lbs
Shipping Weight: 12.35 lbs
Color: Black

1849-MIX2_1.pdf 331047 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor