Z-Wave Fan Coil Thermostat for air-conditioning systems control. Compatible with: Aeotec, ComfortClick, Eedomus, Ezlo, Fibaro HC LITE, HC2, HC3, Jeedom, Home Assistant, Homey, Hubitat, RazBerry, SmartThings, Thinka, Zipato gateways and Z-Wave JS library.
The HELTUN Fan Coil Thermostat has 5 relay outputs each with max 5A load and two independent inputs for relay channels which allow it to control systems with different power sources for Fan Speed and heating/cooling control. It is possible or to use outputs as dry contacts. E.g. to Input 1 with the required power source is for relay channels 1, 2 and 3, which can be loaded up to a max 15A and used for fan speed control. Input 2 with the required power source is for relay channels 4 and 5, which can be loaded up to a max 10A and used for heating/cooling control.
- Inclusion/exclusion into/from z-wave network
- Non Secure
- S0 secure
- S2 unauthorized, S2 authorized
- Association control of Z-Wave devices in the network
- 3 operating modes with individual temperature set point:
- COM, ECO, TIME
- 4 time schedule for 7 days of the week:
- Morning, Day, Evening, Night
- 4 climate modes:
- Heating and Cooling,
- Heating only,
- Cooling only,
- Ventilation only
- Software energy consumption meter logic
- Consumption meter reset
- Temperature sensors calibration
- Choosing temperature hysteresis: 0.2°C - 10.0°C
- Choosing temperature scale (Celsius / Fahrenheit)
- Adjustable LCD brightness: Auto or Manual
- LCD standby mode
- Child lock (touch buttons lock)
- Factory reset
- OTA function (Firmware update over the air).
