HDMI®over Fiber Receiver

Crestron® HDMI® over Fiber Transmitters and Receivers deliver professional-gradedigital HD AV signal extension for use in the home, classroom, auditorium, or corporate boardroom. Without any special setup or configuration, the HD-RX3-Freceiver works with anHD-TX3-Ftransmitter[1]to enable wire runs up to 1000 feet (300 m) over a singlemultimode fiber strand[2].The use of fiber not only facilitates long wire runs, but is also ideal for wiring to outdoor devices and between buildings, providing optical isolation against ground loops, lightning surges, and other electrical disturbances. The HD-RX3-Fsimultaneously handles high-definition digital video and audio, analog audio, Ethernet, USB HID[3], RS-232, and IRsignals.
Robust HD Signal ExtensionCrestron HDMI over Fibertechnology delivers ultra-reliable extension of uncompressed video and computer signals. The HD-RX3-F handles video resolutions up to Full HD 1080p60, and computer resolutions up to UXGA and WUXGA, with support for HDCP and Deep Color. Audio capabilities include support for Dolby Digital®, DTS®, and uncompressed 7.1 linear PCM, as well as analog stereo signals. In addition to HDMI, the HD-RX3-F is also compatible with DVI display devices using an appropriate adapter or interface cable.
A Fully Linked Solution
In addition to video and audio, the HD-RX3-F provides for the extension of networking and control signals for a true one-wire AV interface solution. Its 10/100 Ethernet port affords high-speed LAN connectivity over the full 1000 ft length of fiber. The USB HID port allows a keyboard, mouse, or other USB HID compliant device to be connected at the receiver and used to control a computer or other host at the transmitter location.[3]IR and bidirectional RS-232 control signalsmay also be routed to control a display device and other equipment.
Comprehensivewithout Complication
Crestron HDMI over Fiberaffords a very dependable signal extension solution that’s simple to implement. No special configuration or programming is required — just connect your source and display and enjoy high-quality HD video and audio from across the room — or from another entire building. The HD-RX3-Fis housed in an attractive, compact enclosure, with provisions for mounting to any flat surface, or to one rail of a 19” EIA equipment rack.
Crestron offers the fiber optic cable, connectors, and termination kit for a complete, easy wiring solution. A range of professional AV interface cables and wall plates is also available to complement the HD-RX3-F for a total custom installation solution.