Audio Production Equipment : Amplifiers (Audio) : Dynacord - SL 1200

Stable 2 x 600W Power Amplifier, Class AB Topology

Series: SL

Model: SL 1200

Comprehensive protection system - protection against overheating, overload, short circuit, HF and DC
Patented LPN filter - switchable frequency and phase response correction of connected loudspeakers
Contents:
1 x Power amplifier
1 x Owner's manual

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Solid DYNACORD amplifier technology at highly competitive prices. These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters. The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behavior of loudspeakers.

Comprehensive protection system - protection against overheating, overload, short circuit, HF and DC
Patented LPN filter - switchable frequency and phase response correction of connected loudspeakers
Contents:
1 x Power amplifier
1 x Owner's manual
1 x Mains cord
4 x Foot stand

Amplifier Signal Type - Other
Amplifier Type - Power Amplifier

Depth: 421.50 mm
Height: 88.10 mm
Width: 483 mm
Product Weight: 14.80 kg
Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 5 C
Maximum Frequency Response (Bandwidth): 40 kHz
Maximum Frequency Response (Bandwidth): 40000 Hz
Minimum Frequency Response (Bandwidth): 10 Hz
Minimum Frequency Response (Bandwidth): 0.01 kHz
Signal to Noise Ratio: 107 dB
Maximum Midband Output Power, THD = 1%, 1kHz, Dual Channel: 2 ohms - 900W, 4 ohms - 600W, 8 ohms - 380W
Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: 2 ohms - 1700W, 4 ohms - 950W, 8 ohms - 480W
Maximum Bridged Output Power, THD = 1%, 1kHz: 4 ohms - 1800W, 8 ohms - 1200W
Input Sensitivity, rated power at 8 ohms, 1kHz: +3.1 dBu (1.11Vrms)
Maximum Input Level: +21 dBu (8.69Vrms)
Voltage Gain, ref. 1kHz: 32 dB
Output Stage Topology: Class AB

Datasheet for SL Series Power Amplifier 342239 kb - Other

Project List

Find a Dealer

Find a Distributor