Provides power to STEINEL low voltage occupancy sensors and other control devises. Includes an isolated relay for use with HVAC controls and other low voltage devices. Includes Force on and off control inputs for integration with a building automation system.
As part of our endeavour to deliver professional lighting and control solutions for the entire enterprise, Crestron is pleased to offer STEINEL PROFESSIONAL products, which are available for sale through authorized Crestron Commercial Lighting system integrators.
Based in Germany, STEINEL PROFESSIONAL has been manufacturing lighting controls for over 25 years. Their product offering includes a wide variety of controls and sensors for indoor and outdoor applications.
The TR 150-A is a full featured power pack with an isolated relay that provides power to STEINEL low voltage occupancy sensors and other control devices. They are Class 2 output power supplies, suitable for parallel interconnection.
The power packs switch the load(s) ON and OFF in response to signals from the control devices.
All wires have UL Style 1659, 250°C, 600V insulation:
• 18 AWG: Black for Line and White for Neutral
• 12 AWG: two Red wires for normally open dry contact from the 20A relay
• 22 AWG: 9 low voltage conductors: Red (+24VDC), Black (-24 VDC), Blue (Control Input), Orange (Force On), Brown (Force Off), Gray (Momentary Switch Input), Yellow (Isolated Relay Common), Yellow with Red Stripes (Normally Open Isolated Relay), Yellow with Black Stripes (Normally Closed Isolated Relay)
Convenient mode switch selects either manual ON or automatic ON operation
LED status indicator
Built-in isolated relay for use with HVAC controls and other low voltage devices
Force on and force off control inputs allow for integration with a building automation system for time of day control or load shed applications
Switching is performed at, or close to, the zero-cross of the AC waveform in order to improve relay performance
1/2 inch threaded nipple and two lock nuts are used to secure to a standard 1/2" knockout
Low voltage momentary switch input allows for manual control in automatic or manual mode
Switching Power Supply provides up to 250mA of 24VDC to low voltage controls
15A receptacle load control rated
24VDC +/- 5% 250mA (class 2)
20A at 120/230/277VAC 50/60Hz - ballast and incandescent load, 1hp at 120-240VAC, 50/60Hz 15A at 120VAC, 50/60Hz - receptacle load
Sustainability Rating :
Operating Temperature (Maximum) :
Operating Temperature (Minimum) :
AC Voltage (Minimum) :
AC Voltage (Maximum) :
Isolated Relay :
Single pole, double-throw with NO, NC and common outputs, rated 1A at 30VAC/VDC
Lighting Power Supply Type -
Batteries (Power Packs)