Signalrouting/- switching : Routing- und Matrix-Switcher : Evertz - Xenon

4RU Advanced SDI Router

Model: Xenon

Multiple signal formats within a single frame
Optional output reclocking in blocks of 8 outputs
All outputs can switch in one TV frame
Dual reference inputs
Advanced audio features including Soft Switching

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Dokumente

The Xenon allows any mix of formats within a frame in independent blocks of 32 inputs or outputs. Any of the supported formats, 3G/HD/SD/AES/Analog, can be expanded to fill an entire 128x128 frame. Additionally the Xenon supports optical routing from 3Mb/s to 3Gb/s in blocks of 32 inputs or outputs. The Xenon is housed in a 4RU frame, switching up to 64 sources to 64 destinations, or in an 8RU frame switching up to 128 sources to 128 destinations. Additional input and output modules can be installed into the router at anytime.

Multiple signal formats within a single frame
Optional output reclocking in blocks of 8 outputs
All outputs can switch in one TV frame
Dual reference inputs
Advanced audio features including Soft Switching
Dolby-E™ signal compatible
Redundant internal controllers
Q-Link, Ethernet and RS-485 control interfaces
Deterministic switching
SNMP and system monitoring
Powerful and intuitive WinSetup Software
Clean switch option (SPT Module)

Matrix Switcher Video Input Type - SDI
Routing Type - Video
Switcher Type - Video
Spec Sheet available - Yes

Tiefe: 450 mm
Height: 177.80 mm
Outputs: Selectable in blocks of 32
Width: 482.60 mm
Rise/Fall Times: < 0.4ns
Regulatory Compliance: CSA Listed to 60065, CE, FCC Part 15, CE EMC
Inputs: Selectable in blocks of 32
Output Jitter: 0.2 UI p-p with < 250m input cable Annex A
Path Length: 12ns, typical
Product Weight: 16 kg
Rack Units (Height): 4
Input Impedance: 75 ohm
Output Impedance: 75 ohm
Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 0 C
Wechselspannung (Minimum): 100 Volts
Wechselspannung (Maximum): 240 Volts
SD Video Inputs Signals supported: SMPTE ST 259 1997, ASI DVB standard
SD Video Inputs Signal Level: 800mV p-p nominal
SD Video Inputs Return Loss 5-270MHz: 15dB typical
SD Video Inputs Cable equalization: Belden 1694A, 250m
SD Video Inputs Connectors: BNC per IEC 61169-8 Annex A
SD Video Outputs Signal Level: 800mV p-p ±10%
SD Video Outputs Return Loss: 5-270MHz 15dB typical
SD Video Outputs DC Offset: 0 ±0.5V
SD Video Outputs Connectors: BNC per IEC 61169-8 Annex A

Xenon Multi-Format Routers 139 kb - Data Sheet

Projektliste