1 x 4 NTSC/PAL Video Distribution Amplifier

Model: RU-VDA4B

Video distribution with 4 outputs
Adjustable gain amplification
Input loop out jack
Video 1V signal indicator
10MHz Bandwidth, NTSC or PAL

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

Accessoires

The RU-VDA4B is the ideal choice in most applications where video signals need to be distributed. Video inputs and outputs are made on the front panel via BNC, PHONO, or type F jacks. Power connections are made using full-size barrier block terminals on the rear panel.

The RU-VDA4B has two jacks in the input stage. One jack is for the input signal, the other is a loop through output of the source signal. The input stage is bridging. If 75-ohm termination of the input signal is required, the termination is plugged onto the LOOP OUT jack.

Gain is user adjustable from the front panel. The GAIN potentiometer allows adjustment from -1dB to +7dB.

Video distribution with 4 outputs
Adjustable gain amplification
Input loop out jack
Video 1V signal indicator
10MHz Bandwidth, NTSC or PAL
1/3-Rack, high-density rack mounting

Spec Sheet available - Yes

Operating Temperature (Maximum): 55 C
Operating Temperature (Minimum): 0 C
Number of Inputs: 1
Number of Outputs: 4
Tiefe: 76.20 mm
Height: 43.18 mm
Width: 147.32 mm
Product Weight: 0.30 kg
Shipping Weight: 0.42 kg
Stromaufnahme: 0.06 Amps
DC-Spannung: 24 Volts
Noise: Less than -70dB below (1Vp-p)
INPUT: 1k-ohm bridging 75-ohm line
Gain: -1dB to +7dB (0.9 to 2.25Vp-p, adjustable)
Outputs: 1 loop out from input signal, 4 amplified outputs
Output Level: 1Vp-p into 75-ohm
Frequency Response: 10Hz to 10MHz (+/-0.2dB)
Output Isolation: Greater than 40 dB
Differential Gain: 0.1 %
Differential Phase: 0.1 ° (measured at 10% and 90 APL)
connector type: BNC, PHONO or Type F
Package Type: Cardboard Box
Package dimensions: 4.375x7x2.25 inch
Tariff code: 8518.40.2000

EZ-VDA2B - Video Distribution Amplifier - 1X2 BNC NTSC/PAL

EZ-VDA3B - Video Distribution Amplifier - 1X3 BNC NTSC/PAL

FP-AVDA4 - Stereo Audio/Video Distributor-1x4, Phono Jacks

FP-VDA4 - NTSC/PAL Video Distribution Amp - 1x4 - BNC

TX-VLA1 - Video Line Amplifier - Adjustable Gain and EQ

Distribution Amplifier 609697 kb - Data Sheet

Projektliste

RU-RA3R
Rack Adapter for RACK-UP Series

UC-1R
1RU Rack-up Enclosure

WDG1R
Table Top Wedge Chassis

DRA-35R
RACK-UP DIN Rail Adapter

RU-BR1
Mounting Bracket for RACK-UP Series

RU-SMA1
RACK-UP Mounting Plate - mounts any RACK-UP module in a cabinet or other flat surface