Hörhilfen : Hörverstärker Systeme : Williams AV - IR SY12 D

IR Plus Secure with Dante

Model: IR SY12 D

System Includes:
IR M1 infrared modulator
(2) IR E4 emitters
(5) IR RX20 receivers
CHG 520 charger

View Manufacturers Website

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

IR+ system packed with all the tools needed for a secure, functioning system.

System Includes:
IR M1 infrared modulator
(2) IR E4 emitters
(5) IR RX20 receivers
CHG 520 charger
(2) NKL 001 Neckloops
MLB 003 Linking bar
(2) BKT 024 brackets
IDP 008 Accessibility Signage

Dante Enabled - Yes
ROHS Compliant - Yes
Warranty - Yes
Wireless Receiver Transmission - IR
Spec Sheet available - Yes

Tiefe: 208.28 mm
Height: 44.45 mm
Width: 482.60 mm
Product Weight: 2.40 kg
Wirkleistung: 36 Watt
Farbe: Black
Warranty (Length/Type): 2 Years
Zertifizierungen: CE, FCC, RCM, WEEE, CB Scheme, ISED, VCCI
Minimum Frequency Response (Bandwidth): 40 Hz
Minimum Frequency Response (Bandwidth): 0.04 kHz
Maximum Frequency Response (Bandwidth): 16000 Hz
Maximum Frequency Response (Bandwidth): 16 kHz
Signal to Noise Ratio: 67 dB
Number of Receivers Supplied: 1
Operating Temperature (Maximum): 50 C
Operating Temperature (Minimum): 0 C
Wechselspannung (Minimum): 110 Volts
Wechselspannung (Maximum): 240 Volts
IR E4:
•Dimensions: 7.5” (W) x 1.4” (H) x 3.6” (D) (19.1 cm x 3.6 cm x 9.1 cm)
•Weight: 0.8 lb (362 g)
•Color: Black
•Power: 48 VDC supplied by IR M1 via CAT 5e cable.
•Coverage Area: Up to 18,000 square feet (1,670 sq. m) in single channel mode
•Connectivity: +48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1.
•Operating requirements:0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere
•Approvals: CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
•Warranty: 2 years on Emitter; 90 days on accessories
IR M1:
•Rack Mount: Single Rack Unit
•Power Supply: International Desktop Supply
•Output: +48VDC, 0.75A center-positive
•Power Switch: Rocker switch with LED
•Modulation: FM Wideband, +50kHz deviation, 50uS pre-emphasis
•Carrier Frequency: Selectable, 2.3/2.8 or 3.3/3.8MHz
•Total Harmonic Distortion:Less than 2%, electrical response
•Audio Processor Functions: DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control
•Auto Carrier Shut-Off: Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage.
•Infrared Test LED: Dual IR LED for receiver testing, monitoring, and audio signal testing.
•Audio Input: (2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power
•Internal Test Tone: 400 Hz internal test tone selectable as audio input source for setup and diagnostics
•Remote Configuration: Available through embedded website
•Headphone Output: (2) 1/4" headphone jacks on front panel for monitoring CH A and CH B audio inputs
•Emitter Output Jack: Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication and Baseband signals for IR transmission
CHG 520:
•Dimensions: 12"L x 6.25"W x 1.5"H (30.48 cm x 15.875 cm x 3.81 cm)
•Weight: 13.6 lbs
•Color: Black metal and plastic
•Power Supply Input: 120 VAC
•Power Supply: 100-240V / 12VDC TFP 043
•Unit Capacity: 5 Units
•Indicators: Individual Charging Indicators: Red LEDs
•Warranty: 1 year (90 day warranty on cables and power supply)
•Approvals: WEEE, RoHS, CE, FCC, CANADA, RCM, VCCI
IR RX20:
•Weight: 1.6 oz
•Material and Color: IR Transparent polycarbonate, black
•Battery Type: LiPo
•Battery Life: 8 hours
•Battery Charger: CHG 520
•Operating Temp: 32-122° F (0-50° C)
•Range: Up to 15,000 sq. ft. in single channel mode with IR T2 transmitter
•Operating Frequency: 2.3 MHz or 2.8 MHz or stereo
•Frequency Response: 100 Hz to 12 kHz, ± 3 dB
•Signal to Noise Ratio: 60 dB at 10 m
•Controls: Volume control thumbwheel;3-position selection switch (2.3 MHz, 2.8 MHz, stereo), Off/on slider for power
•Acoustic Output: 120 dB MAX SSPL90 with 2 cc coupler
•Compatibility: Compatible with 2.3 MHz and 2.8 MHz IR transmitters
•Headphone Jack: 3.5mm stereo
•Ear pads: EAR 089
•Approvals: CE, RoHS, FCC, Canada, RCM, VCCI, WEEE
•Warranty: 5 years (90 days on battery)

IR E4 - IR Plus Emitter IR E4

IR M1 D - IR + Infrared Modulator / Wi-Fi Server with Dante input supporting 2 channels. Includes TFP 065 power supply and WLC 004 line cord.

IR RX20 - Infrared Stereo Stethoscope Receiver

MCAT-277-IR-M1.pdf 311795 kb - Data Sheet

Projektliste

IRPlusFlyer_5_25_21.pdf 755961 kb - Brochure

Projektliste

MAN-273_C-IR-M1.pdf 1552472 kb - Instructions

Projektliste