hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Home Technology/Automation
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production & Lighting
Security & Safety
Signal Management
Search by Category
Flag
EnglishFrenchGermanItalianPortugueseSpanish
Lightware - DA2HDMI-4K-Plus
Request Quote
All Products
lightware

1x2 HDMI Distribution Amplifier with HDCP

Series: DA

Model: DA2HDMI-4K-Plus

Part #: 91320007

  • Daisy chain support
  • Fixes EDID and keeps the source's output continuously active
  • Advanced EDID Management
  • Intuitive control software for device configuration
  • Device control via USB
Compare
Project List
Product Info
Tech Specs
Documents

DA2HDMI-4K-Plus is a multifunctional distribution amplifier with built-in EDID Management and Pixel Accurate Reclocking, supporting DVI and HDMI 1.4 signals with or without HDCP encryption. The output signal is reclocked and stabilized using Lightware Pixel Accurate Reclocking technology to remove jitter caused by long cables or poor quality sources.

DA2HDMI-4K-Plus features Advanced EDID Management and can emulate any HDMI display for continuous video output, even if the attached display is disconnected or powered down. HDCP enable/disable function turns off the unit’s HDCP capability, which helps integrate certain laptops into a non-HDCP AV environment. The EDID memories from 1 to 55 are factory preset, the memories from 62 to 98 are user programmable. EDID memories from 56 to 61 are for universal EDID presets. Memory 0 is transparent for output 1, memory 99 is transparent for output 2, so using these settings the EDID of the last attached display devices (monitor or projector) will be reported to the source. With the Easy EDID Creator (PC software wizard) the users can create their own EDID by completing four simple steps. Experienced users can use the Advanced EDID Editor software to manage every possible setting in the EDID, which can be uploaded to the user programable memory of the DA2HDMI-4K-Plus.

DA2HDMI-4K-Plus can be rack-mounted or used standalone. The unit is equipped with the highest grade gold plated connectors to ensure reliable connection.

  • Daisy chain support
  • Fixes EDID and keeps the source's output continuously active
  • Advanced EDID Management
  • Intuitive control software for device configuration
  • Device control via USB
  • Supports deep color signals (24/30/36bit RGB/YCbCr 4:4:4)
  • Supports HDMI 4K signal formats (4K UHD at 30Hz RGB 4:4:4 or at 60Hz YUV 4:2:0, up to 9Gbps)
  • Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
  • HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
  • HDCP enable/disable function on input
  • Uncompressed video up to 9Gbps datarate (300MHz pixel clock)
  • Mounting options for rack, furniture or truss
  • 1920x1080 at 120Hz/4:4:4, 4096x2048 at 30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
  • No signal latency, zero frame delay
  • Input cable equalization up to 30m at 1080p60Hz (with 24 AWG high quality DVI/HDMI cable)
  • Pixel Accurate Reclocking
  • Built-in video test pattern generator
  • Status LEDs for video and audio detection
  • Frame Detector (analyze detailed video timings)
  • External universal power adaptor
  • Firmware upgrade through USB
  • Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
  • Applications:
  • Rental and staging
  • Military
  • Medical
  • Digital Signage
  • Multiroom video
  • Conference rooms, collaborative telepresence
 
Request Quote
 

Included in Case Studies