Mikrofone : Deckenmikrofone : Audix - M55WD

Hanging Ceiling Microphone for the Dante

Model: M55WD

Optimized for voice recognition
Low-noise preamp circuitry
Immunity from RF interference
Two-color LED status indicator
RJ45 connectors for plug-and-play integration with the Audix Dante | AES67 Integrated Microphone System

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

The M55WD is an innovative, hanging ceiling microphone system designed for applications where aesthetics, sound quality, and ease of installation are critical. All electronics are fully integrated with high sensitivity and low noise. The signal output is balanced to eliminate RF interference caused by cell phones and mobile devices.

Installing the M55 requires just one 5/8inch hole in the ceiling, with no additional tools needed. The M55's mounting hardware easily adjusts the hanging height up to four feet from the ceiling surface without removing ceiling tiles and allows for fingertip height adjustment and roHigh output allows distance miking.

Optimized for voice recognition
Low-noise preamp circuitry
Immunity from RF interference
Two-color LED status indicator
RJ45 connectors for plug-and-play integration with the Audix Dante | AES67 Integrated Microphone System
No external power adaptor required
Designed, assembled, and tested by Audix in the USAtation control. An optional aiming clip (MCHANGER) easily makes any additional angular adjustments
Applications:
Video teleconferencing
Distance learning
Boardrooms
Surveillance
Hospital and medical procedures
Ambient room miking
Includes:
1.56mm / 0.063inch seismic and fire cable restraint

Dante Enabled - Yes
Microphone Type - Condenser
Polar/Pickup Pattern - Cardiod
Spec Sheet available - Yes

Output Impedance: 150ohms
Sensitivity: 38mV (C) / Pa at 1k
Equivalent Noise Level: 22dB (A-weighted)
Power Requirements: 18 - 52V phantom
Steckverbinder: RJ45
Recommended Cable: CAT5, CAT5e, CAT6, CAT6a, or CAT7
Materials / Finish: Aluminum and zinc alloy / white finish
Weight: 70g / 2.4oz (Mic and Cable), 499g / 17.6oz (Junction Box and Safety Cable)
Maximum Frequency Response (Bandwidth): 10 kHz
Maximum Frequency Response (Bandwidth): 10000 Hz
Minimum Frequency Response (Bandwidth): 60 Hz
Minimum Frequency Response (Bandwidth): 0.06 kHz
Dynamic Range: 108 dB
Maximum SPL (Sound Pressure Level): 130 dB
Signal to Noise Ratio: 72 dB

ADX40 - Miniature Hanging Microphone

ADX60 - Cardioid Pre-polarized Boundary Condenser Microphone

ATS1LP - Heavy-duty Shock Absorbent Microphone Table Stand with 5-pin Terminal Connector

DN4 - Dante | AES67 Microphone Interface

DN43 - Dante | AES67 Microphone Interface for the Audix M3 tri-element microphone

GS1 - Flush mount wall cardioid mic with nickel finish. Mic can be rotated for directivity. 18-52 V phantom power.

LCB1 - Logic control button. Designed to remotely control the on-off function of a microphone (or other devices) when used in conjunction with a logic enabled media system.

M3 - Tri-element Hanging Ceiling Microphone

M3DK - Microphone and Interface Kit for the Dante | AES67 Integrated Microphone System

M3WHM - Tri-element Ceiling Microphone

M40 - Miniaturized Condenser Ceiling Microphone

M55 - Hanging Ceiling Microphone with Height Adjustment

M60 - Boundary Condenser Microphone with Integrated Circuitry

M65 - Tabletop Installed Microphone

M70 - Flush Mount High Output Ceiling Microphone for Distance Miking

M70WD - Flush-mount Ceiling Microphone for the Dante

Microphone 412856 kb - Data Sheet

Projektliste

Suggested Products

Ceiling Microphone

by Biamp

TeamConnect Ceiling Medium (Black)

by Sennheiser

Low-profile Ceiling Microphone and PoE+ Amplifier

by Biamp