EMerge Alliance Registered
The CLC-1DIMFLV2EX-24V is 100% EMerge compatible, designed to flawlessly work within a 24Volts DC room-level power distribution system. The EMerge Alliance is a not-for-profit open industry association leading the rapid adoption of safe DC power distribution in commercial buildings through the development of EMerge Alliance standards.[2]Crestron is a proud member and supporter of the Alliance.
Onboard Sensor Inputs
Each module comes equipped with onboard inputs for use with photocells and occupancy sensors. This unique feature not only reduces wiring costs, it also eliminates the need for extra hardware.
Out-of-the-box Control via Standard Switch
The CLC-1DIMFLV2EX-24Vuses either a momentary or a maintained switch to provide a closure, such as a standard lighting switch.A standard lighting switch, the kind carried in any hardware store, is a cost-effective solution for basic on and off functions. A momentary, pushbutton-type switch can be used when the application requires dimming the load. The momentary switch can be set up so that tapping the button turns the connected load on and off, while pressing and holding the button dims the load up or down.
Complete Crestron Control
Because it's connected to the Crestron system, the CLC-1DIMFLV2EX-24V can also be controlled from any keypad, touch panel, remote, or mobile device. Tie in occupancy sensors and photocells together with Crestron Fusion EM® software for a complete solution to effectively manage energy.
Simple Setup
Setup is simple, especially when using a connected maintained or a momentary switch. A specific series of button presses initiates the wireless device’s acquire mode, so there's no need to climb a ladder to join the device to the infiNET EX network.
infiNET EX
Ultra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, each infiNET EX device functions as an expander, passing command signals through to every other infiNET EX device within range (approximately 150 feet or 46 meters indoors), ensuring that every command reaches its intended destination without disruption.
The CLC-1DIMFLV2EX-24V communicates with a Crestron® control system via an infiNET EX Wireless Gateway (model CEN-RFGW-EX, DIN-AP3MEX, or MC3[4]). Up to 100 infiNET EX devices may coexist on a single wireless network, and every device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths.
