Lichtsteuerung : Dimmer & Dimmer Systeme : Crestron Electronics, Inc. - CLS-EXP-DIMFDB

iLux® 3-Wire Fluorescent Dimmer Expansion Module

Series: Green Light

Model: CLS-EXP-DIMFDB

Part #: 6502356

Works with Crestron iLux, CLW and CLX Series dimmers
Emulates the characteristics of the dimmer that is controlling it
Up to 5 expansion modules can be connected to a single iLux dimmer channel
Supports 120/230/277V incandescent, NCC, MLV and 2-wire dimmable fluorescent loads
Includes threshold adjustment for setting minimum fluorescent dimming level

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Dokumente

CLS-EXP-DIMFDB enables the expansion of Crestron's iLux integrated lighting system and other Crestron lighting dimmers to allow control of 3-wire electronic fluorescent dimming ballasts. A single model supports 120/230/277V loads up to 16A. Any output channel of the iLux system can be used to control the CLS-EXP-DIMFDB to dim a fully loaded circuit. It is also compatible with CLW-series in-wall dimmers and select CLX-series lighting control modules. CLS-EXP-DIMFDB is designed for mounting to a vertical surface. Conduit knockouts are provided on the bottom and lower sides. All connections are made via screw terminals behind the front cover.

Works with Crestron iLux, CLW and CLX Series dimmers
Emulates the characteristics of the dimmer that is controlling it
Up to 5 expansion modules can be connected to a single iLux dimmer channel
Supports 120/230/277V incandescent, NCC, MLV and 2-wire dimmable fluorescent loads
Includes threshold adjustment for setting minimum fluorescent dimming level
Built-in air gap relay at the output
Surface mount design

Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 0 C
Wechselspannung: 277 Volts
Tiefe: 80.77 mm
Height: 224.03 mm
Width: 162.31 mm
Product Weight: 1.52 kg
Dimmer Channels: 1
Load Rating: 16 A
Minimum Load: 15W at 120V, 25W at 230V, 30W at 277V
Load Types: 3-wire electronic fluorescent dimming ballasts
Line Power Input Voltages: 120 to 277Vac, 50/60Hz
Control Input Voltage: 120/230Vac, 50/60Hz, phase independent of line power and load
NEUT Connections: One captive screw terminal, neutral connection for control input
DIM OUT Connections: One Captive screw terminal, dimmed load output
Hot Connections: One captive screw terminal, line power input
Ground Connections: One 3-terminal chassis ground bus bar
Load State Indicators: One red LED behind front panel, illuminates when load output is on
Power Indicators: One green LED behind front panel, indicates line power is applied to the hot terminal
Environmental Humidity: 10 to 90% RH (non-condensing)

cls-exp-dimfdb.pdf 1047 kb - Data Sheet

Projektliste

Find a Dealer