Signal Routing / Switching : Related Signal routeing / Switching Products : Crestron Electronics, Inc. - DMB-CPU

CPU Blade for DM Switchers

Model: DMB-CPU

Provides a backup replacement CPU blade for a DM-MD64X64 or DM-MD128X128 DigitalMedia™ Switcher
CPU blade can be purchased separately to provide a backup replacement
Replacement of the CPU blade can be performed on site without requiring any tools and without removing the switcher from the equipment rack

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

A CPU blade is included with every DM-MD64X64 and DM-MD128X128 DigitalMedia™ Switcher. The DMB-CPU-64 is the CPU blade for the DM-MD64X64; the DMB-CPU-128 is the CPU blade for the DM-MD128X128. Either CPU blade can be purchased separately to provide a backup replacement. Replacement of the CPU blade can be performed on site without requiring any tools and without removing the switcher from the equipment rack. Replacement takes just seconds, although a system reboot may be required to activate the new CPU.

Provides a backup replacement CPU blade for a DM-MD64X64 or DM-MD128X128 DigitalMedia™ Switcher
CPU blade can be purchased separately to provide a backup replacement
Replacement of the CPU blade can be performed on site without requiring any tools and without removing the switcher from the equipment rack

UL Rated - Yes

Warranty (Length/Type): 3 Years Limited
Connectors:
- LAN:
  - (1) 8-wire RJ45 female;
  - 10/100/1000Base-T Ethernet port
- SERVICE:
  - (1) 8-wire RJ45 female;
  - For factory use only
- MEMORY:
  - (1) memory card slot;
  - Accepts up to 32 GB for memory expansion (2 GB SD™ memory card included);
  - For save/load of configuration and EDID settings and for firmware update
- USB (DM-MD128X128 only):
  - (1) USB Type A female;
  - USB 2.0 host port for connection of a USB flash drive;
  - For save/load of configuration and EDID settings and for firmware update
- AUDIO OUT:
  - (1) 5-pin 3.5mm detachable terminal block;
  - Balanced/unbalanced stereo line-level output (for future use);
  - Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
  - Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
Controls & Indicators:
- ACT : (1) green LED, indicates CPU activity
- MSG : (1) red LED, indicates CPU has generated an error message
- CPU RESET : (1) recessed miniature pushbutton, reboots the CPU and front panel
- LAN : (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
- SERVICE : (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
Construction: Plug-in blade, occupies the CPU blade slot of a DM-MD64X64 or DM-MD128X128 switcher, includes metal faceplate w/black finish

CPU Blade 552 kb - Data Sheet

Project List

CPU Blade 4279 kb - Other

Project List

Find a Dealer