Netzteile : OEM-Netzteile : Crestron Electronics, Inc. - FT2A-UTK-PWS

Power Supply for FT2 ELEC Series FlipTop

Model: FT2A-UTK-PWS

Part #: 6509647

Designed for use with a Crestron FT2 ELEC series FlipTop™
Single power supply is included with each FlipTop
Maximum of two power supplies may be connected to a single FlipTop

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

Designed for use with a Crestron FT2 ELEC series FlipTop™. One is included with each FlipTop, and a second may be purchased as required to support installations using two USB Rapid Charging Modules.

Overview:

The FT2A-UTK-PWS is a power supply designed for use with a Crestron FT2 ELEC series FlipTop™. A single power supply is included with each FlipTop. A second power supply may be purchased separately when required to support more than one (but not more than two) USB Rapid Charging Modules (model FT2A-CHGR-USBA/C). Each FT2A-UTK-PWS includes a mounting bracket, which allows attachment of the power supply to the FlipTop chassis beneath the table. A maximum of two power supplies may be connected to a single FlipTop.

Designed for use with a Crestron FT2 ELEC series FlipTop™
Single power supply is included with each FlipTop
Maximum of two power supplies may be connected to a single FlipTop

UL Rated - Yes

Operating Temperature (Maximum): 45 C
Operating Temperature (Minimum): 0 C
Zertifizierungen: UL,CE, FCC
Wechselspannung (Maximum): 240 Volts
Wechselspannung (Minimum): 100 Volts
Stromaufnahme: 2.50 Amps
DC-Spannung: 24 Volts
Tiefe: 39.88 mm
Height: 124.71 mm
Width: 56.13 mm
Connections - Line: 1x IEC 60320 C7 main power inlet, Mates with removable power cord, included
Connections - Load: 1x 6ft (1.83m) attached cable with 2.1 x 5.5mm DC power barrel connector, Center pin +
Composition: Plastic, black, includes mounting bracket
Mounting: •Attaches beneath the table to mounting slots on the front, left, or right side of the FlipTop chassis•Requires approximately 10 inches (254mm) minimum vertical clearance beneath the top surface of the table•Projects 1.57 inches (40mm) from the front or side of the FlipTop chassis beneath the table (requires an additional 0.2 inch or 5 mm for installation)

CBLRA-INSERT-BLANK - Blank Spacer Insert for Cable Retractor Mounting Brackets

FT2-700-ELEC-PTL-AL - FlipTop FT2 Series Cable Management System, 700 Size, Electrical, Pass-Through Lid, Alloy

FT2-700-ELEC-PTL-B - FlipTop™ FT2 Series Cable Management System, 700 Size, Electrical, Pass-Through Lid, Black

FT2-700-MECH-PTL-AL - FlipTop FT2 Series Cable Management System, 700 Size, Mechanical, Pass-Through Lid, Alloy

FT2-700-MECH-PTL-B - FlipTop FT2 Series Cable Management System, 700 Size, Mechanical, Pass-Through Lid, Black

Power Supply 1963552 kb - Other

Projektliste

Power Supply 89574 kb - Other

Projektliste

Angebot anfordern

Find a Dealer

Danke!

Wir werden uns in Kürze mit Ihnen in Verbindung setzen

Contact Us

schließen

Crestron Electronics, Inc.
Oude Keerbergsebaan 2
Rijmenam 2820
Belgium
+32.15.50.99.50
www.crestron.com

Kontakt in Bezug auf dieses Produkt:

Crestron Electronics, Inc.

Modell: FT2A-UTK-PWS

Installation Needed

Request more information from a dealer near you

schließen

Über uns

Kontaktieren Sie uns

Registrieren

My-iQ Login

AV-iQ US

AV-iQ Europe

AV-iQ AU

CEPro-iQ

Newsletter Subscriptions:

AV-iQ

Commercial Integrator

CE Pro

Desktop-Ansicht

© 2024 Emerald X, LLC. All rights reserved.

ABOUT CAREERS AUTHORIZED SERVICE PROVIDERS DO NOT SELL MY PERSONAL INFORMATION TERMS OF USE PRIVACY POLICY