Halterungen : Dreh-, Sicherheitshalterungen und Halterungen für Sonderanwendungen : Crestron Electronics, Inc. - MMK-RS

Remote Device Mount for Crestron In-Wall Sensors

Model: MMK-RS

Part #: 6513407

Mount in-wall remote sensors completely flush with drywall
Pre-construction mounting kit provides rough-in for wiring and sensor during construction
Compatible with Crestron® CHV-RTS, CHV-RTHS, C2N-RTHS, and GLS-OIRLCL-C-CN in-wall sensors (all sold separately)
Optional surface mount with a flat, paintable, escutcheon ring (supplied)

View Manufacturers Website

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Dokumente

The MMK-RS pre-construction mounting kit is designed for installation during the rough-in stage of construction to simplify wiring and sensor positioning. The mounting kit also provides the ability to completely flush mount a sensor to make it virtually hidden on a wall. Depth adjustments allow the MMK-RS to be installed in wall surfaces that are up to 3 in. (77 mm) thick.

The mounting kit includes an escutcheon ring that allows for sensor mounting in non-drywall installations. Additionally, the escutcheon ring can be used in drywall applications where a flush installation is not required.

Mount in-wall remote sensors completely flush with drywall
Pre-construction mounting kit provides rough-in for wiring and sensor during construction
Compatible with Crestron® CHV-RTS, CHV-RTHS, C2N-RTHS, and GLS-OIRLCL-C-CN in-wall sensors (all sold separately)
Optional surface mount with a flat, paintable, escutcheon ring (supplied)

Spec Sheet available - Yes

Tiefe: 92.96 mm
Height: 101.85 mm
Width: 101.85 mm
Product Weight: 0.21 kg
Zertifizierungen: Intertek
In-Wall Sensors: Compatible with CHV-RTS, CHV-RTHS, C2N-RTHS, and GLS-OIRLCL-C-CN sensors; Sensors all sold separately
Material: White ABS plastic mounting block with two ABS plastic mounting brackets; Red ABS plastic mud shield protects opening and provides reference point to stop sanding, provides cable tie off point
Mounting: New construction mount; Secures to 2 in. x 4 in. (minimum) framing, vertical stud or horizontal blocking; Integrated center marks; Requires 3.25 in. (83 mm) of free space behind bracket for mounting legs, wiring, and sensor; Mounts in wall surfaces up to 3 in. (77 mm) thick; Flush Mount in drywall using drywall mud, sensor does not protrude from wall surface; Surface mount in non-drywall installations using paintable escutcheon ring, sensor and escutcheon ring protrudes ~1/8 in. (3 mm) from wall surface

Mount 788036 kb - Data Sheet

Projektliste

Find a Dealer