QuickMedia® FlipTop Data Center without Keypad

The QM-FTDC-NB provides an elegant multimedia interface specially designed to deliver extended connectivity for computers and tabletop teleconferencing equipment. Handsomely finished in either black anodized or brushed aluminum, the QM-FTDC-NB mounts flush in any tabletop surface for a clean, professional appearance. Wiring for the QM-FTDC-NB is extremely simple requiring just a single CresCAT™QM cable (sold separately). Inputs are provided for one RGB/component signal with corresponding stereo audio to accept a connection from a computer or other high-resolution source. In addition, the QM-FTDC-NB includes two RJ11 and two RJ45 pass-thru connectors to accommodate phone, LAN, and other data signals. An AC power receptacle is also included. Two gated microphone inputs are included via terminal block connectors located below the table surface. Both dynamic and condenser type microphones are supported with software switchable 48V phantom power available at both microphone inputs. Balanced or unbalanced line-level sources such as wireless microphones can also be accommodated. Input gain and gating controls for each microphone/line input are fully adjustable at setup, and can also be controlled in real-time from a keypad or touchpanel. Using Crestron's revolutionary QuickMedia transport, all input signals are transmitted from the QM-FTDC to any QuickMedia Receiver or Distribution Center over a single inexpensive CAT5e type cable*. Computer resolutions up to 1920 X 1200 pixels at 60Hz are supported over cable runs up to 450 feet. Audio signals are transmitted digitally with high-performance 24-bit resolution. QuickMedia dramatically simplifies system design and installation, affording a higher level of performance at a lower overall cost. Whether using just one FlipTop Box or several, complete system operation can be made transparent to the end-user with all signal routing occurring smoothly under the command of the MediaManager control system. Built-in video sensing can be utilized to trigger automatic input selection and power control. Complete MediaManager systems are easy to design, program and adjust from start to finish using Crestron SystemBuilder™ software.