Signalrouting/- switching : Switchers : Panasonic - ET-YFB200G

Digital Link Switcher

Model: ET-YFB200G

Designed for use with Panasonic video display devices
Two output lines of video, audio and control signals (LAN/serial) can be transmitted over distances of up to 150m using only a LAN cable (CAT5e or greater STP cable)
Can also handle an additional DVI-D output line
Addition to video and RGB signals, HDMI signals can be input
Switching is done using the projector’s wireless remote control or the control buttons of the DIGITAL LINK switcher

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Dokumente

DIGITAL LINK switcher is designed for use with Panasonic video display devices. Two output lines of video, audio and control signals (LAN/serial) can be transmitted over distances of up to 150 meters (in long reach mode) using only a LAN cable (CAT5e or greater STP cable). It can also handle an additional DVI-D output line. In addition to video and RGB signals, HDMI signals can be input. Switching is done using the projector’s wireless remote control or the control buttons of the DIGITAL LINK switcher.

Designed for use with Panasonic video display devices
Two output lines of video, audio and control signals (LAN/serial) can be transmitted over distances of up to 150m using only a LAN cable (CAT5e or greater STP cable)
Can also handle an additional DVI-D output line
Addition to video and RGB signals, HDMI signals can be input
Switching is done using the projector’s wireless remote control or the control buttons of the DIGITAL LINK switcher

Rackmountable - Yes
Supported Resolution - WUXGA (1920x1200)
Switcher Connector Type - DVI
Switcher Type - Audio
Switcher Type - Video

Operating Temperature (Maximum): 40 C
Product Weight: 1.30 kg
Regulatory Compliance: HDCP
Height: 44 mm
Wechselspannung (Minimum): 100 Volts
Width: 210 mm
DC-Spannung: 16 Volts
Tiefe: 250 mm
Operating Temperature (Minimum): 0 C
Wechselspannung (Maximum): 240 Volts
Scanning Frequency Input HDMI:
•480i (525i): fH 15.73kHz, fV 59.94Hz
•576i (625i): fH 15.63kHz, fV 50Hz
•480p (525p): fH 31.47kHz, fV 59.94Hz
•576p (625p): fH 31.25kHz, fV 50Hz
•720 (750)/60p: fH 45.00kHz, fV 60Hz
•720 (750)/50p: fH 37.50kHz, fV 50Hz
•1080 (1125)/60i: fH 33.75kHz, fV 60Hz
•1080 (1125)/50i: fH 28.13kHz, fV 50Hz
•1080 (1125)/25p: fH 28.13kHz, fV 60Hz
•1080 (1125)/24p: fH 27.00kHz, fV 50Hz
•1080 (1125)/24sF: fH 27.00kHz,fV 24Hz
•1080 (1125)/30p: fH 33.75kHz,fV 48Hz
•1080 (1125)/60p: fH 67.50kHz, fV 25Hz
•1080 (1125)/50p: fH 56.25kHz,fV 30Hz
Scanning Frequency Input YPBPR (YCBCR):
•480i (525i): fH 15.73kHz, fV 59.94Hz
•576i (625i): fH 15.63kHz, fV 50Hz
•480p (525p): fH 31.47kHz, fV 59.94Hz
•576p (625p): fH 31.25kHz, fV 50Hz
•720 (750)/60p: fH 45.00kHz, fV 60Hz
•720 (750)/50p: fH 37.50kHz, fV 50Hz
•1080 (1125)/60i: fH 33.75kHz, fV 60Hz
•1080 (1125)/50i: fH 28.13kHz, fV 50Hz
•1080 (1125)/60p: fH 67.50kHz, fV 60Hz
•1080 (1125)/50p: fH 56.25kHz, fV 50Hz
•1080 (1125)/24p: fH 27.00kHz,fV 24Hz
•1080 (1125)/24sF: fH 27.00kHz, fV 48Hz
•1080 (1125)/25p: fH 28.13kHz, fV 25Hz
•1080 (1125)/30p: fH 33.75kHz, fV 30Hz
Scanning Frequency Output:
•WUXGA60-CVT-RB (1920x1200): fH 74.04kHz, fV 59.95Hz
•1080/25p (1920x1080): fH 67.50kHz, fV 60Hz
•SXGA+60 (1400x1050): fH 65.22kHz, fV 60Hz
•1366x768/60 (1366x768): fH 47.71kHz, fV 59.79Hz
•1280x800/60 (1280x800): fH 49.70kHz, fV 59.81Hz
•XGA60 (1024x768): fH 48.36kHz, fV 60Hz
•720/50p (1280x720): fH 45.0kHz, fV 60Hz
•1080/24p (1920x1080): fH 27.0kHz, fV 24Hz
•1080/30p (1920x1080): fH 33.8kHz, fV 30Hz
•1080/50p (1920x1080): fH 56.3kHz, fV 50Hz
•720/60p (1280x720): fH 37.5kHz, fV 50Hz
•1080/60p (1920x1080): fH 28.1kHz, fV 25Hz
•Dot clock frequency: 65.0 MHz to 154.0 MHz
•The supported output signal for the terminal/terminal is same as the terminal. However, output of 3D signal is supported only by the terminal/terminal, and it is not supported by the terminal.
Terminals VIDEO IN: PIN jack x1, 1.0Vp-p, 75 ohms
Terminals DVI-D OUT: DVI-D 24-pin x1
Terminals AUDIO IN: M3 (L, R) stereo mini jackx3, 0.5Vrms, 22k-ohms
Terminals AUDIO OUT: M3 (L, R) stereo mini jackx1 (monitor out: 0-2.0Vrms, variable), 2.2k-ohms
Terminals SERIAL IN: 3-pin 3.5mm detachable terminal for external control (RS-232C compliant)
Terminals Remoter In: D-sub 9-pin (female)x1 for external control (parallel)
Terminals LAN: RJ-45x1, for network connection, 1 00Base-TX/10Base-T
Terminals DIGITAL LINK: RJ-45x2, for DIGITAL LINK connection
Wirkleistung: 32 Watt

Switcher 3437543 kb - Other

Projektliste

Switcher 8508079 kb - Instructions

Projektliste

Switcher 751986 kb - Other

Projektliste

Find a Dealer

Find a Distributor

Suggested Products

4K 18Gbps HDMI USB KVM Switch: 4-, 8-, 16-, 24- and 32-Port

by Network Technologies Inc. (NTI)

Taurus UCX 2x2 Switcher with HDMI2.0 and USB3.1 Ports

by Lightware

Universal Switcher Transmitter

by Lightware