Signalmanagment und -verarbeitung : Verteilerverstärker : RDL, Radio Design Labs - FP-AVDA4

Stereo Audio/Video Distributor-1x4, Phono Jacks

Series:

Model: FP-AVDA4

Consumer Audio/Video Distribution
Four Outputs (Video + Stereo Audio)
Professional Quality Performance
75 ohm Video Input/Outputs
Unbalanced Audio Input/Outputs

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

Accessoires

The FP-AVDA4 is the ideal choice in applications where consumer format audio and video signals need to be distributed simultaneously. Audio and video inputs and outputs are made on the top panel phono jacks. The FP-AVDA4 has a single 75 ohm input phono jack for the video signal and two phono jacks for the left and right audio inputs. Four source-terminated, 75 ohm video outputs are provided on the video output phono jacks. Four stereo audio outputs are provided on phono jack pairs located adjacent to the corresponding video output. Unused outputs need not be terminated. Audio and video outputs are at unity gain.

Consumer Audio/Video Distribution
Four Outputs (Video + Stereo Audio)
Professional Quality Performance
75 ohm Video Input/Outputs
Unbalanced Audio Input/Outputs
Wideband Video - Flat to 10 MHz
Ultra-Compact All Metal Construction

DA Video Input - Other
DA Video Output - Other
DA Audio Input - Other
DA Audio Output - Other

VIDEO :
Inputs: Phono jack, 1V p-p
Input Impedance: 75 ohm
Gain: Unity
Outputs (4): Phono jack
Output Level: 1 V p-p (into 75 ohm)
Frequency Response: 10 Hz to 10 MHz (+/- 0.2 dB)
Noise: < -75 dB (below 1 V p-p)
Output Isolation: > 45 dB
Differential Gain: 0.1%
Differential Phase: 0.1 degree (measured at 10% and 90% APL)
Audio:
Inputs (2): Phono jacks (stereo), -10 dBV Unbalanced
Input Impedance: 10 k ohm, bridging
Gain: Unity
Outputs (8): Phono jacks (4 stereo)
Output Impedance: 150 ohm drives 10 k ohm lines
Frequency Response: 20 Hz to 40 kHz (+/- 0.25 dB)
THD+N: < 0.05%; typ. 0.01% (1 kHz)
IMD: < 0.02%
Output Level: -10 dBV
Headroom: > 18 dB
Noise: < -85 dB below –10 dBV
Übersprechen: Better than 75 dB (20 Hz to 20 kHz); typ < -90 dB
Power Requirement: GROUND-REFERENCED, 24 Vdc @ 60 mA
Height: 1.20 in. 3.05 cm
Width: 3.25 in. 8.26 cm
overall length: 6.41 in. 16.28 cm
Number of Inputs: 1
Number of Outputs: 4
Tiefe: 162.81 mm
Height: 30.48 mm
Width: 82.55 mm
Shipping Weight: 0.36 kg
Operating Temperature (Maximum): 55 C
Operating Temperature (Minimum): 0 C

RU-VDA4B - 1 x 4 NTSC/PAL Video Distribution Amplifier

ST-DA3 - Line Level Distribution Amplifier - 1x3

Datasheet for Stereo Audio/Video Distributor - 1x4 - Phono Jacks 226150 kb - Other

Projektliste

DRA-35F
Flat-Pak DIN Rail Adapter

FP-RRA
Rack Adapter FLAT-PAK Series - 19 in. Fixed

FP-RRAH
Rack Adapter FLAT-PAK Series - 19 in. Hinged

PM-1T
Pole Mount Tray