: : RDL, Radio Design Labs - SF-ND2

Network to Digital Audio Interface

Model: SF-ND2

Converts two Dante network audio signals to left/right digital audio
Aes/ebu or s/pdif coaxial or optical output
Selectable Dante sample rates - 44.1khz, 48khz, 88.2khz, 96khz
Digital audio output sample rate equals Dante sample rate
Transformer-isolated AES/EBU output

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

The SF-ND2 is a digital audio interface that converts two Dante network audio channels to a stereo digital audio output. The output is switch-selectable to provide an AES/EBU on XLR, or coaxial and optical S/PDIF. The switch enables the appropriate output jack and any required electrical and data format conversion. Special software is not required to configure the module. The SF-ND2 is a professional grade product for studio quality performance.

The SF-ND2 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.

The SF-ND2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.

Converts two Dante network audio signals to left/right digital audio
Aes/ebu or s/pdif coaxial or optical output
Selectable Dante sample rates - 44.1khz, 48khz, 88.2khz, 96khz
Digital audio output sample rate equals Dante sample rate
Transformer-isolated AES/EBU output
Dante audio signals remain in the digital domain through the output
Special software not required for module setup
Led indicator for valid power and network sync
Operation from POE power (class 0, IEEE 802.3af)
Equipped for Sysflex™ rack mounting or surface mounting

Dante Enabled - Yes
Spec Sheet available - Yes

Tiefe: 146.56 mm
Height: 42.67 mm
Operating Temperature (Maximum): 50 C
Operating Temperature (Minimum): 0 C
Width: 70.87 mm
Product Weight: 0.40 kg
Shipping Weight: 0.49 kg
Network Connector: RJ45 with Link and Speed indicators
Digital Audio Ethernet Protocol: Dante
Transmission Rate: 100 Mbps
Sample Rates supported: 44.1, 48 (default), 88.2 and 96 kHz
Bit Depth Supported: 24 bits
Outputs (3): 110-ohm AES/EBU XLR, transformer isolated, 75-ohm S/PDIF RCA jack, S/PDIF optical (selectable)
Indicators (3): Ethernet Link and Speed (2, rear panel), Sync (front panel)
Power Requirement: PoE Class 0, IEEE 802.3af
Package Type: Cardboard Box
Package dimensions: 7 x 4.375 x 2.25 in.
Tariff code: 8517.18.0050

AV-NH1 - Network to Stereo Headphone Amplifier

AV-NL2 - Network to Audio Interface

AV-XMN4 - Microphone to Network Interface

DD-BN22 - Wall-mounted Bi-directional Mic/Line Dante Network Interface

DD-BN2ML - Wall-mounted Dante Audio Network Interface

DD-BN31 - 4x4 Wall-mounted Dante Audio Network Interface

DD-BN40 - 4x2 Wall-mounted Dante Audio Network Interface

DD-BTN44 - Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

DDB-BN22 - 2x2 Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN2M - 2x2 Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN2ML - Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN31 - 4x4 Wall-mounted Bi-directional Mic/Line Dante Interface

DDB-BN40 - 4x2 Wall-mounted Bi-directional Mic/Line Dante Interface

DDB-BTN44 - Mini-Jack Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

DDS-BN22 - 2x2 Wall-mounted Dante Audio Network Interface

DDS-BN2M - 2x2 100Mbps Wall-mounted Dante Audio Network Interface

DDS-BN2ML - 100Mbps Wall-mounted Dante Audio Network Interface

DDS-BN31 - 4x4 24-bit Wall-mounted Dante Audio Network Interface

DDS-BN40 - 4x2 24-bit Wall-mounted Dante Audio Network Interface

DDS-BTN44 - RCA Jack Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

FP-NML2 - Network to Mic/Line Interface

FP-NML2P - Network to Mic/Line Interface with PoE

FP-NML2V - Network to Mic/Line Interface with VCA

FP-NML2VP - Network to Mic/Line Interface with VCA, PoE

RU-BNF - Format-A Bi-directional Network Interface

RU-BNFP - Format-A Bi-directional Network Interface with PoE

RU-FN - Format-A to Network Interface

RU-FNP - Format-A to Network Interface with PoE

RU-LB2 - Line-level Bi-directional Network Interface

RU-LB2P - Line-level Bi-directional Network Interface with PoE

RU-LB4 - Line-level Bi-directional Network Interface

RU-LB4P - Line-level Bi-directional Network Interface with PoE

RU-MLB2 - Mic/Line Bi-directional Network Interface

RU-MLB2P - Mic/Line Bi-directional Network Interface with PoE

RU-MLB4 - Mic/Line Bi-directional Network Interface

RU-MLB4P - Mic/Line Bi-directional Network Interface with PoE

RU-NFD - Network to Format-A Interface/Distributor

RU-NFDP - Network to Format-A Interface/Distributor with PoE

RU-NL2 - Network to Line Level Interface

RU-NL2P - Network to Line Level Interface with PoE

RU-NL4 - Network to Line Level Interface

RU-NL4P - Network to Line Level Interface with PoE

SF-NP35E - PoE++ Network to 35W Mono Audio Amplifier - 70V or 100V

SF-NP50A - Network to 50W Mono Audio Amplifier - 70V or 100V

Audio Interface 1755101 kb - Other

Projektliste

Audio Interface 3103595 kb - Other

Projektliste

Audio Interface 918966 kb - Other

Projektliste

Audio Interface 1235893 kb - Data Sheet

Projektliste