Audio - Video Produktions- & Bearbeitungssysteme : Verstärker : RDL, Radio Design Labs - SF-NH1

Network to Stereo Headphone Amplifier

Model: SF-NH1

Converts two Dante network audio signals to a stereo headphone
Output on professional quality 3.5 mm stereo MINI Jack
Selectable Dante sample rates - 44.1kHz, 48kHz, 88.2kHz, 96kHz
Front-panel output level control
Special software not required for module setup

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

The SF-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment. The output connects through a stereo 3.5 mm Mini-jack. Each channel provides 100 mW into 100 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module. The SF-NH1 is a professional grade product for studio quality fidelity and low noise performance.

The SF-NH1 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.

The SF-NH1 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.

Converts two Dante network audio signals to a stereo headphone
Output on professional quality 3.5 mm stereo MINI Jack
Selectable Dante sample rates - 44.1kHz, 48kHz, 88.2kHz, 96kHz
Front-panel output level control
Special software not required for module setup
Exceptional low-noise and low-distortion performance
High resolution 24 bit digital to analog conversion
Legendary RDL analog filtering enhances superb audio performance
LED Indicator for valid power and network sync
Operation from PoE power (Class 0, IEEE 802.3af)
Equipped for SysFlex™ rack mounting or surface mounting

Amplifier Type - Headphone Amplifier
Dante Enabled - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 50 C
Operating Temperature (Minimum): 0 C
Tiefe: 146.56 mm
Height: 42.67 mm
Width: 70.87 mm
Product Weight: 0.40 kg
Shipping Weight: 0.49 kg
Noise: < -75dB (below -20dBFS), < -95 (below 0dBFS)
Network Connector: RJ45 with Link and Speed indicators
Digital Audio Ethernet Protocol: Dante
Transmission Rate: 100 Mbps
Sample Rates supported: 44.1, 48 (default), 88.2 and 96 kHz
Bit Depth Supported: 24 bits
Reference Level: 0dBFS = 150mW into 100-ohm
Outputs (2): Mini-jack Stereo (L and R)
Output Level (maximum): 0dBFS = 150mW into 100-ohm
Output Impedance: < 50 ohm
Frequency Response: 20Hz to 20kHz (+/- 0.5dB)
THD+N: < 0.05% (20Hz to 20kHz, -20 dBFS), 0.015% at 1kHz (typ)
Übersprechen: < -80dB (1kHz, -20dBFS)
Headroom above -20dBFS: 20dB
Indicators (3): Ethernet Link and Speed (2, rear panel), Sync (front panel)
Power Requirement: PoE Class 0, IEEE 802.3af
Specification Conditions: Gain/Level +/- 1dB
Package Type: Cardboard Box
Package dimensions: 7 x 4.375 x 2.25 inch
Tariff code: 8517.18.0050

DD-BN22 - Wall-mounted Bi-directional Mic/Line Dante Network Interface

DD-BN2M - Wall-mounted Bi-directional Mic/Line Dante Audio Interface

DD-BN2ML - Wall-mounted Dante Audio Network Interface

DD-BN31 - 4x4 Wall-mounted Dante Audio Network Interface

DD-BN40 - 4x2 Wall-mounted Dante Audio Network Interface

DD-BTN44 - Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

DDB-BN22 - 2x2 Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN2M - 2x2 Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN2ML - Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN31 - 4x4 Wall-mounted Bi-directional Mic/Line Dante Interface

DDB-BN40 - 4x2 Wall-mounted Bi-directional Mic/Line Dante Interface

DDB-BTN44 - Mini-Jack Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

DDS-BN22 - 2x2 Wall-mounted Dante Audio Network Interface

DDS-BN2M - 2x2 100Mbps Wall-mounted Dante Audio Network Interface

DDS-BN2ML - 100Mbps Wall-mounted Dante Audio Network Interface

DDS-BN31 - 4x4 24-bit Wall-mounted Dante Audio Network Interface

DDS-BN40 - 4x2 24-bit Wall-mounted Dante Audio Network Interface

DDS-BTN44 - RCA Jack Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

FP-NML2 - Network to Mic/Line Interface

FP-NML2P - Network to Mic/Line Interface with PoE

FP-NML2V - Network to Mic/Line Interface with VCA

FP-NML2VP - Network to Mic/Line Interface with VCA, PoE

RU-BNF - Format-A Bi-directional Network Interface

RU-BNFP - Format-A Bi-directional Network Interface with PoE

RU-FN - Format-A to Network Interface

RU-FNP - Format-A to Network Interface with PoE

RU-LB2 - Line-level Bi-directional Network Interface

RU-LB2P - Line-level Bi-directional Network Interface with PoE

RU-LB4 - Line-level Bi-directional Network Interface

RU-LB4P - Line-level Bi-directional Network Interface with PoE

RU-NFD - Network to Format-A Interface/Distributor

RU-NFDP - Network to Format-A Interface/Distributor with PoE

RU-NL2 - Network to Line Level Interface

RU-NL2P - Network to Line Level Interface with PoE

RU-NL4 - Network to Line Level Interface

RU-NL4P - Network to Line Level Interface with PoE

Headphone Amplifier 1129981 kb - Data Sheet

Projektliste

Headphone Amplifier 1755109 kb - Other

Projektliste

Headphone Amplifier 3103603 kb - Other

Projektliste

Headphone Amplifier 918974 kb - Other

Projektliste