Audio - Video Produktions- & Bearbeitungssysteme : Audio & Video-Prozessoren : RDL, Radio Design Labs - ST-CX2S

Subwoofer Crossover Filter

Series:

Model: ST-CX2S

Subwoofer Signal from Stereo Source
Adjustable Low-Frequency Boost
Low-Noise and Low-Distortion Crossover
Active Crossover Component
RDL® SupplyFlex™ Power Input Configuration

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

Accessoires

The ST-CX2S is a subwoofer signal equalizer in the STICK-ON series of products from RDL. The ST-CX2S offers flexibility in equalization adjustment, with the exceptional performance of RDL. The ST-CX2S features two separate, isolated balanced bridging inputs which may each be wired balanced or unbalanced. The output driver is 150 ohm balanced which can drive low or high impedance balanced or unbalanced lines. The module operates at unity gain at 63 Hz (balanced input to balanced output). A BOOST control permits adjustment of the output at 32 Hz from flat to +5.5 dB. The ST-CX2S features RDL's SupplyFlex power input configuration for operation directly from ground-referenced, floating or bipolar 24 Vdc power.

Subwoofer Signal from Stereo Source
Adjustable Low-Frequency Boost
Low-Noise and Low-Distortion Crossover
Active Crossover Component
RDL® SupplyFlex™ Power Input Configuration

Operating Temperature (Maximum): 55 C
Operating Temperature (Minimum): 0 C
Total Harmonic Distortion + Noise (THD+N): 0.01 %
Tiefe: 16.51 mm
Height: 39.37 mm
Width: 76.20 mm
Shipping Weight: 0.09 kg
Inputs (2): 50 k ohm balanced line-level (+4 dBu)
Outputs: 150 ohm balanced line-level (+4 dBu)
Output Bandwidth: 22 to 80 Hz (adjustable BOOST)
High Frequency Attenuation: greater than 45 dB
Gain: Unity at 63 Hz
Headroom: 18 dB minimum at 30 Hz (maximum boost)
Input CMRR: greater than 60 dB
Residual Noise: less than 90 dB
Power Requirement: 24 to 33 Vdc @ 30 mA

ST-EQ3 - 3 Band Equalizer - Line Level

ST-FS6 - Ferrite Suppressor / RF Filter

ST-HP3 - 300 Hz and 500 Hz High Pass Filter

Datasheet for Subwoofer Crossover Filter 178532 kb - Other

Projektliste

DRA-35S
STICK-ON DIN Rail Adapter

DRA-35S6
STICK-ON DIN Rail Adapter

DTB
STICK-ON® Series Detachable Terminal Block

MB-1
Mounting Kit - RU, ST and TX Series

MB-3
Kit to Mount ST, TX Series Modules on FP Panel

MSR-1
Snap Rail Adapter - STICK-ON Series

PM-1T
Pole Mount Tray

SMK-12
STICK-ON Mounting Plate

SR-10
STICK-ON Series Mounting Rack - 10 Modules

SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules

SR-4
STICK-ON Series Mounting Rack - 7 Modules max.

STR-19A
STICK-ON Series Racking System - 12 Modules

STR-19B
Hinged 19-inch Rack Mount Panel