Test- und Messsysteme : Signal Generators : RDL, Radio Design Labs - ST-OSC2A

Audio Oscillator - 1kHz and 10 kHz

Series:

Model: ST-OSC2A

Low-impedance output drives virtually any audio line
Outputs may be connected to either balanced or unbalanced lines
Multiturn level adjustment permits precise output setting
Separate output level control provided for each oscillator
Integral AGC circuitry for stable output level

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

Accessoires

Each of the ST-OSC2 products is a Dual Audio Oscillator. These products are designed for quick, convenient installation, and reliable operation in a variety of audio applications.

Low-impedance output drives virtually any audio line
Outputs may be connected to either balanced or unbalanced lines
Multiturn level adjustment permits precise output setting
Separate output level control provided for each oscillator
Integral AGC circuitry for stable output level
Each oscillator has two separate outputs to drive stereo lines
Precision Sine-Wave Audio Signal
Amplitude-Stable Oscillator
Two Single-Tone Oscillators
Precise User-Adjustable Levels
Each Oscillator Has Two Separate Outputs
ST-OSC2A, 1 kHz and 10 kHz
ST-OSC2B, 100 Hz and 400 Hz
RDL® SupplyFlex™ Power Input Configuration

Signal Generator Type - Audio

Operating Temperature (Maximum): 55 C
Operating Temperature (Minimum): 0 C
Output Impedance: 200 ohm
Outputs: 2 for each oscillator, bal. or unbal.
Output Impedance: 200 ohm to drive high or low Z lines
Nominal Frequencies ST-OSC2A: 1 and 10 kHz
Nominal Frequencies ST-OSC2B: 100 and 400 Hz
THD+N ST-OSC2A: 0.5 %
THD+N ST-OSC2B: < 3 %
Output Level: Off to +10 dBu (adjustable, 600 ohm load. Level Maintained by internal AGC circuit
Power Requirement: 24 to 33 Vdc @ 80 mA

STS-RF1 - Shielded Chassis for STICK-ON Module

Dual Audio Oscillators 448 kb - Other

Projektliste

DRA-35S
STICK-ON DIN Rail Adapter

DRA-35S6
STICK-ON DIN Rail Adapter

DTB
STICK-ON® Series Detachable Terminal Block

MB-1
Mounting Kit - RU, ST and TX Series

MB-3
Kit to Mount ST, TX Series Modules on FP Panel

MSR-1
Snap Rail Adapter - STICK-ON Series

SMK-12
STICK-ON Mounting Plate

SR-10
STICK-ON Series Mounting Rack - 10 Modules

SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules

SR-4
STICK-ON Series Mounting Rack - 7 Modules max.

STR-19A
STICK-ON Series Racking System - 12 Modules

STR-19B
Hinged 19-inch Rack Mount Panel