Audio - Video Produktions- & Bearbeitungssysteme : Verstärker : RDL, Radio Design Labs - STA-1M

Audio Line Amplifier - Mono

Series:

Model: STA-1M

Single-Channel Audio Line Amplifier
Balanced or Unbalanced Inputs and Outputs
Bridge a Line to Avoid Loading
High to Low Impedance Conversion
Low to High Impedance Conversion

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

Accessoires

The STA-1M allows bridging any audio line, adjusting the gain, and driving a balanced or unbalanced line. The circuit design allows the input to accept either balanced or unbalanced signals, of either high or low impedance. This is an instrumentation type input stage which will amplify the differential input, regardless of ground reference. The output is capable of driving either high or low impedance loads, and the output may be connected either balanced or unbalanced.

Single-Channel Audio Line Amplifier
Balanced or Unbalanced Inputs and Outputs
Bridge a Line to Avoid Loading
High to Low Impedance Conversion
Low to High Impedance Conversion
Instrumentation Input to Isolate Ground Loops
Precisely Match Audio Levels
RDL SupplyFlex Power Input Configuration

Amplifier Signal Type - Audio
Amplifier Type - Other

Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 10 Hz
Minimum Frequency Response (Bandwidth): 0.01 kHz
Operating Temperature (Maximum): 55 C
Operating Temperature (Minimum): 0 C
Shipping Weight: 0.09 kg
Total Harmonic Distortion + Noise (THD+N): 0.05 %
Inputs: 10000 Ohms balanced or unbalanced bridge
Outputs (2): 150 Ohms balanced to drive low or high-Z; 75 Ohms unbalanced
Output Signal: +4 dBu (nominal, adjustable)
Headroom above +4 dBu: greater than 18 dB
CMRR: greater than 50 dB at full gain 100 Hz
Power Requirement: 24 to 33 Vdc at 50 mA
Tiefe: 16.51 mm
Height: 39.37 mm
Width: 76.20 mm

STA-1 - Dual Bal/Unbal Line Amp: -12 to 20 dB Gain

STS-RF1 - Shielded Chassis for STICK-ON Module

Audio Line Amplifier 732 kb - Other

Projektliste

ACB-2
Jack Box - Dual Phono Jacks

DRA-35S
STICK-ON DIN Rail Adapter

DRA-35S6
STICK-ON DIN Rail Adapter

DTB
STICK-ON® Series Detachable Terminal Block

MB-1
Mounting Kit - RU, ST and TX Series

MB-3
Kit to Mount ST, TX Series Modules on FP Panel

MSR-1
Snap Rail Adapter - STICK-ON Series

SMK-12
STICK-ON Mounting Plate

SR-10
STICK-ON Series Mounting Rack - 10 Modules

SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules

SR-4
STICK-ON Series Mounting Rack - 7 Modules max.

STR-19A
STICK-ON Series Racking System - 12 Modules

STR-19B
Hinged 19-inch Rack Mount Panel