Evolution Wireless Digital EW-DX EM 2 Rack Receiver

Model: EW-DX EM 2

2 channel half rack (9.5ft)
Up to 88 MHz switching bandwidth
PoE IEEE 802.3af Class 3
Equidistant Channel Spacing: 146 channels in standard mode; 293 channels in Link Density Mode
Network enabled for control with Sennheiser Control Cockpit/media control system through a number of 3rd party modules

View Manufacturers Website

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Dokumente

Videos

Two-channel digital half-rack (9,5") receiver for use with Evolution Wireless Digital handheld, bodypack and tablestand transmitters. Extended 88 MHz switching bandwidth, intermodulation-free operation for up to 293 channels with secure AES-256 encryption and redundant power supply via Power over Ethernet (PoE).

2 channel half rack (9.5ft)
Up to 88 MHz switching bandwidth
PoE IEEE 802.3af Class 3
Equidistant Channel Spacing: 146 channels in standard mode; 293 channels in Link Density Mode
Network enabled for control with Sennheiser Control Cockpit/media control system through a number of 3rd party modules
Clear and easy focused user interface with OLED display
Ethernet connectivity (IPv4 and IPv6)
Secure AES 256 encryption
External PSU 12V/1A
All-metal housing
Includes:
EW-DX EM 2 rack receiver
2 rod antennas
power supply with country adapters
GA 3 rackmount set
4 rubber feet
quick guide
safety guide
manufacturer declaration sheet

Rackmountable - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 55 C
Operating Temperature (Minimum): -10 C
Wireless: Yes
System:
•Bluetooth® Low Energy (BLE) frequency range: 2402 - 2480 MHz
•Audio frequency response: 20 Hz - 20 kHz (-3 dB) at 3 dBfs
•Audio THD: -60 dB for 1 kHz at -3 dBfs input level
•Dynamic range: 134 dB
•System latency: 1.9 ms
•Relative humidity: 5 - 95 % (non-condensing)
EW-DX EM 2 (Rack Receiver) :
•Input voltage 11 - 13 V or PoE IEEE 802.3af Class 0 (CAT5e or higher)
•Input current: 1 A
•Transmit power (radiated): BLE: max. 10 mW EIRPAudio output power 18 dBu max.
•Headphone output: 2x 70 mW at 32 OHMS
•Ethernet: RJ-45 socket, IEEE802.3; 100Base-TX (half+full duplex); 10Base-T (half+full duplex) (CAT5e or higher)
•Dimensions: 212 x 44 x 189 mm (8.35" x 1.73" x 7.44")
•Weight: approx. 1000 g (2.2 lbs) (without antennas and power supply

Receiver 353765 kb - Data Sheet

Projektliste

Evolution Wireless Digital – EW-D & EW-DX Product Tour

Projektliste

EW-DX - Sennheiser Business Solutions

Projektliste

Find a Dealer

Find a Distributor