Pocketalker 2.0 Personal Amplifier

Model: PKT 2.0 EH

Ergonomic, lightweight design
Extended high and low frequency range
Superior sound quality
Internal microphone
Built-in T-coil loop compatible

View Manufacturers Website

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

Hear what you want to hear by amplifying the sounds and voices most important to you with a Pocketalker 2.0 (PKT E1).

Simply plug the included earphone or headphone into the headphone jack. Position the internal microphone near the preferred sound and adjust the volume and tone control until the sounds you want to hear are clear.

The Pocketalker personal amplifier is used to amplify specific sounds or voices. It helps you hear what you want to hear by reducing distracting background noise.

Ergonomic, lightweight design
Extended high and low frequency range
Superior sound quality
Internal microphone
Built-in T-coil loop compatible
Rechargeable ready
CE (Note 1) Approval
System Includes:
1-Pocktalker 2.0 personal amplifier (includes internal microphone)
1-MIC 014-R plug-in (no cord) microphone
1 – HED 024 folding headphone
1 – EAR 042 isolation earphone
1-BAT 010-2 two AAA alkaline batteries
1-WCA 007 WC 3.5mm male to 2.5mm female cable with mounting clips (12ft)
1-RCS 003 lanyard

ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 5 C
Warranty (Length/Type): 5 Years
PKT 2.0 EH:
•Dimensions: 4.9 L x 2 W x 1-inch H. (124mm x 51mm x 25mm) (Not including clip or microphone assembly)
•Weight: 3.1 oz. (88 grams) (with batteries)
•Color/material: White ABS/Polycarbonate molded plastic case
•Battery Type: Two (AAA size), either 1.5 VDC Alkaline or 1.2 VDC NiMH rechargeable (Williams Sound BAT 010-2 Alkaline or BAT 022-2 NiMH)
•Battery Life: Up to 105 hours (typical usage) with the BAT 010-2 (Alkaline). Low Battery Indicator: Power “On” Green light on front panel flashes.
•NiMH battery Charging: Charging: 16 hours with BAT 022-2. Red LED blinks when charging. End of Charge: Red LED is on solid. At end of charge, maintenance charge is provided.
•Microphone: Internal, omnidirectional MEMS microphone (micro-electro-mechanical system). Optional External, omnidirectional, plug-in electret microphone with foam windscreen and 3.5mm mono plug (MIC 014-R).
•T-Coil: Internal with on/off switch and LED indicator
•Tone Control: External rotary control knob allows user to adjust high/low frequency to optimize hearing
•Balance Control: Adjusts Left/Right Volume Balance
•Power/Volume Control: External rotary volume control knob with integrated power ON-OFF switch
•Microphone Jack: 3.5 mm, stereo mini plug. Tip=Mic signal, Ring=NC, Sleeve=Gnd
•Headphone Jack: 3.5 mm, stereo mini plug. Tip=Left/Mono, Ring=Right, Sleeve=Gnd.
•Optional Accessories: Clip: CLP 014; Allows the user to clip MIC 014 to clothing such as a lapel or shirt pocket. Lanyard: RCS 003; Allows user to wear unit around the neck, or as a wrist strap. 3.5mm-3.5mm Extension Cord: WCA 007 WC; extends an external microphone to 12 ft. Stereo Earphones / Headphones / Neckloop: EAR 042 / HED 024, HED 036 / NKL 001-S (stereo) Neckloop Mono Earphones / Headphones / Neckloop: EAR 013, EAR 008, EAR 022, EAR 041 / HED 021, HED 027 / NKL 001 (mono) Neckloop Charging Kits: BAT KT7
•Power output: 52 mW (max) into 32 ohms (Stereo)
•ALC: Automatic Level Control; Limits maximum output level
•Distortion: 1% THD (max)
•Max gain: 63 dB at 2.5 kHz (Tone=High)
•Frequency response: Tone Control at high position: 2.7dB boost at 5 kHz, 6.7dB cut at 400 Hz. Tone Control at mid position: 0.6dB cut at 5 kHz, 2.9dB cut at 400 Hz. Tone Control at low position: 2.0dB cut at 5 kHz, 3.0dB boost at 400 Hz
EAR 042:
•Style: Dual, in-ear, isolation earphones
•Plug: 3.5mm stereo
•Cord: 39"
•Driver Size: 10 mm
•Nominal Impedance: 32ohms
•Frequency Response: 20 - 20kHz
•Weight: 10g
•Max Power Input: 5 mW
•Sensitivity: 104 dB at 1kHz
•Replacement Silicone Tips: EAR 043 (0ne pair)
HED 024:
•Style: Stereo Headphones
•Plug: 3.5mm stereo
•Cord: 39"
•Driver Size: 30 mm
•Nominal Impedance: 16ohms
•Frequency Response: 20 - 20kHz
•Weight: 60g
•Max Power Input: 100 mW
•Sensitivity: 108 dB at 1kHz
•Replacement Pads: HED 023 (one pair)
MIC 014-R:
•Phantom Powered: No
•Pick-Up Pattern: Omni-directional
•Element: Electret Condenser
•Mic Diameter: 10 mm not including windscreen 19 mm with windscreen
•Sensitivity: -42 dB ± 3 dB
•Frequency Range: 20 Hz - 16 kHz
•Output Impedance: 2.2 kohms
•Standard Operation Range: 2 - 10 V DC
•Signal-to-Noise Ratio: [gt]58 dB
•Replacement Windscreen: WND 002
•Optional 12 ft Extension Cord: WCA 007
•Optional Microphone Clip: CLP 014
•Color: Gold
•Weight: 5 g (0.2 oz)
•Plug: 3.5 mm mono
•Approvals: RoHS
•Warranty: 90 days

EAR 042 - Dual, in-ear, isolation earphones

HED 024 - 16 ohms Stereo Headphone

MIC 014-R - Omnidirectional Plug-mount Microphone

RCS 003 - Pocketalker Lanyard

WCA 007 WC - Microphone extension cord, 12ft

Amplifier 284498 kb - Data Sheet

Projektliste