The TX-SW-IW-0201-KIT HDMI/VGA to HDBaseT in-wall transmitter and standalone HDBaseT receiver feature a 2-Gang decora wall plate for inconspicuous local connectivity and control for a remote source to suit any interior.
Front-facing HDMI and VGA with audio inputs offer discreet source connection, while an HDBaseT output supporting video up to 4K UHD resolutions, multichannel audio, Ethernet passthrough, power, and bidirectional control are located in-wall for single-cable transmission over distance to its included slimline HDBaseT receiver.
The TX-SW-IW-0201-KIT can function either as a single source point-to-point PoH extender solution or as part of a PoH compatible HDBaseT matrix system containing an HDBaseT input for remote source connection supporting 4K UHD video up to 70m/230ft and 1080p/48bit @60Hz to 100m/328ft.
Ideal for remote source connection within a WyreStorm matrix distribution containing an HDBaseT input card, the TX-SW-IW-0201-KIT offers a powerful and reliable HDBaseT wall-plate transmission and receiver solution for the effective delivery of HDMI and VGA with audio signals within any modern 4K or HD application.
- TX-SW-IW-0201-KIT:
- Complete 2-Gang Decora in-wall Class A HDBaseT transmitter and standalone receiver kit
- Supports HDMI and VGA with audio inputs with automatic input detection (HDMI preferred)
- Extends 4K UHD video (HDMI only) up to 70m/230ft or 1080p to 100m/238ft
- Class A HDBaseT 5Play device: 4K/HD video, multichannel audio, Ethernet, control (IR and RS-232) and Power over HDBaseT
- In wall plate powered from included WyreStorm receiver or compatible matrix if used as part of a WyreStorm matrix switcher system
- Receiver supports serial routing and CEC passthrough when used as part of compatible matrix system
- HDCP 2.2 compliant
- Full 3D up to 1080p at 60Hz
- Built-in IR receiver window for easy TV/Projector control
- Transmitter:
- Powered either locally or remotely from included receiver or PoH compatible matrix if used as part of a WyreStorm matrix switcher system
- Automatic input detection - HDMI preferred
- Built-in IR receiver window for easy TV/projector control, EDID management and automatic input detection
- Bi-directional IR supported with built-in IR receiver window for easy TV/projector control
- Supports Ethernet pass-through
- LED indication for HDCP presence within signal and transmission link between devices
- Compact design for convenient and unobtrusive installation
- Receiver:
- Low profile chassis of 18mm/0.7” for easier, more convenient installations behind screens at display zones
- Powered either locally or remotely via a PoH enabled matrix if used as part of a WyreStorm matrix switcher system
- Supports serial routing and CEC passthrough when used as part of compatible matrix system
- Transmits discrete wide-band two-way IR control signal/routed serial commands from compatible matrix together within the HDMI signal
- Multichannel audio up to Dolby Atmos and DTS:X
- Switchable RS-232 selection for firmware update
- Additional phoenix port and threaded DC for use of both standard and locking DC power plugs
- Visual LED indication for power supply, signal status to show display connection, HDCP in signal and Link between HDBaseT devices
- Automatically adjusts feedback, equalization and amplification of signal
- Energy efficient universal power supplies included
- Includes:
- WyreStorm TX-SW-IW-0201 Transmitter:
- 1x WyreStorm TX-SW-IW-0201 HDBaseT Wall plate transmitter
- 1x 3.5mm Phoenix male connector (3 pin)
- 2x 3.5mm Phoenix male connector (2 pin)
- 1x Decorative Wall Plate with 4 screws
- 4x 6-32x20mm Installation Screws
- 1x Printed Quickstart guide
- WyreStorm RX-70-4K Receiver:
- 1x WyreStorm RX-70-4K Receiver
- 1x 3.5mm Phoenix male connector (2 pin)
- 1x 3.5mm Phoenix male connector (3 pin)
- 1x Wide-band IR Emitter
- 1x Wide-band IR Receiver (30-50KHz)
- 1x Pair of RX-70-4K mounting brackets
- 1x Printed Quickstart guide
