Simple and convenient to use, this induction loop receiver is designed for use in induction-looped areas by listeners who do not wear T-coil-equipped hearing aids. Compatible with all IEC60118-4 compliant induction loop systems. 0.2 lbs.
Operates up to 200 hours with two AA alkaline batteries
Simple to use — on/off volume control
Internal tone control
3.5mm stereo jack
Compatible with Williams Sound 2- and 12-bay chargers (CHG 3502 and CHG 3512). Chargers sold separately.
5-year warranty
Spec Sheet available - Yes
Color/material:
Black ABS/polycarbonate molded plastic case
Battery Type:
(2) AA (1.5VDC) Alkaline or NiMH (rechargeable)
Battery Life:
Up to 200 hours with Alkaline batteries
LED Indicator:
Green LED indicates power on, flashes when batteries are low
Headphone Jack:
3.5mm stereo TRS jack works with mono or stereo headphones
Volume Control:
External switched thumb wheel controls power on/off and volume level
Tone Control:
Rotary control inside battery compartment (1kHz reference at 400mA/m input with Tone at mid position)
Induction Coil:
Maximum reception: receiver oriented vertically
Power Output:
35mW (max) into 33 ohms mono impedance
THD:
[lt]2%
Frequency Response:
300Hz to 10KHz, -6dB
Depth:
35.05 mm
Height:
104.14 mm
Width:
72.39 mm
Product Weight:
0.13 kg
Warranty (Length/Type):
2 Years
DL107 SYS D
- Digi-Loop Medium Area, Single Channel Hearing Loop Dante™ System
DL207 SYS D
- Digi-Loop Medium Area, Dual Channel Hearing Loop Dante™ System
DL210 SYS 1 2.0 D
- Digi-Loop Large Area, Dual Channel Hearing Loop Dante™ System