The ILR3 is a high quality audio induction loop receiver which allows the user to listen to an audio frequency induction loop system using a standard pair of stereo headphones (supplied). It has a vertically mounted pick up coil and a low cut filter function to emulate the performance of a hearing aid switched to the T position. It is therefore an essential tool for anyone installing maintaining or managing facilities fitted with induction loops providing them with immediate confirmation that the loop is running. Can be used by anyone without a hearing aid who needs a little extra assistance to hear.
Low distortion
Flat frequency response to 6kHz
Low cut filter—to simulate hearing aid response
Volume control
5 year warranty
Auto power off with headphone removal
> 100 hours life with 2 AA batteries
Applications include Checking that an induction loop system is working. Essential for installers, venue managers and event organisers
Recording the output of a loop system
Providing assistance to people without a hearing aid
Locating sources of interference
Checking loop coverage and signal overspill
Spec Sheet available - Yes
Operating Temperature (Maximum):
113 F
Operating Temperature (Minimum):
14 F
Depth:
1.02 in
Height:
4.41 in
Width:
2.44 in
Sustainability Rating:
IP20
Frequency response - Standard: Flat:
85Hz - 6kHz +/- 0.5dB
Frequency response - Low Cut:
400Hz - 6kHz 3dB (similar to hearing aid)