The DLC510 is a cost-effective DigiLink based module enabling downlinks from up to two satellites to be transported as ASI.
The DLC510 is a dual port electrical L-band RF receiver enabling tuning and demodulation of DVB-S and DVB-S2 signals. The tuners support the full range of 950 to 2150 Megahertz band range and each tunes to a single transponder on C-band or KU-band signals. Support for LNB power and DiSEqC are included. The DLC510 is capable of demodulating two independent transponders supporting QPSK, 8PSK, 16APSK and 32APSK modulation. Operation is fully automatic requiring only downlink frequency and LNB power settings. Each ASI transport stream is output to rear panel BNC electrical connectors, the backplane, and a port selectable front panel HD-BNC.
- Two independent 950-2150 MHz RF inputs
- DiSEqC per input
- Automatic MOD/COD detection
- Advanced RF parameter and signal monitoring
- DVB-S and DVBS-2 compliant
- ASI transport outputs
- Supports transport formats and standards
- DVB-S2: EN 302 307
- DVB-S: EN 300 421
- ASI Output: EN 500 83-9, ETSI 101 891
- MPEG 2 Transport: ISO/IEC 13818-1
- Carrier ID: ETSI TS 103 129
Fully integrated into DigiLink platform enabling
ASI to IP Conversion
ASI Routing
Compact, flexible, and low power
Consumes a single function slot in DigiLink chassis
Configure via HTTP or SNMPv2
Consumes less than 15 Watts
