Each pack of EZ-Stick includes 16 tabs (enough to hang 4 SonoLite panels). To apply, clean attachment points on the back of the SonoLite panel and wall surface with isopropyl alcohol, wipe gently, let dry and do not use household cleaners, separate EZ-Stick strips, remove the red adhesive liner from the strip, Orient vertically (for maximum holding strength) with the removal tabs toward the outside edges of the panel, overhanging the fabric border, attach to plastic area of the panels back surface and press firmly, remove black wall side adhesive liner from the mounting strip, position panel and press attachment points firmly for one minute. Apply to surfaces above 50°F (10°C). Adhesive could soften and lose adhesion above 105°F (40°C). To remove, gently pull corner of panel away from the wall surface to expose EZ-Stick removal tab, grasp the end of the removal tab and slowly pull it along the wall surface stretching at least 15-inch (38 cm) until the strip releases. Never pull the removal tap away from the wall at an angle as wall damage may result and repeat for the other strips.