Signal Processing Systems : Extenders & Repeaters : Black Box - ACXMODH2FPAC-R2

Modular KVM Extender Chassis - 2-Slot, (2) Front-Mounted Internal PSUs, (1) IEC320 Main Power Input, (1) Locking Power Connector for Redundant Power

Series: DKM FX

Model: ACXMODH2FPAC-R2

Allow a user to mount up to 2 DKM cards in a 19" rack chassis
Includes a front-mounted internal power supply
Backplane support to allow seamless installation of cards
Includes:
(1) 2-Port DKM Modular Card Chassis

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The DKM FX Extender System is comprised of modular housing chassis with 2, 4, 6, or 21 slots and transmitter and receiver interface cards. The DKM FX extender setup provides the widest range of possible combinations, which makes it easy to customize for your specific application.

The 2-port chassis is part of the DKM Modular KVM extender family of configurable chassis that house transmitter and receiver interface cards.

Allow a user to mount up to 2 DKM cards in a 19" rack chassis
Includes a front-mounted internal power supply
Backplane support to allow seamless installation of cards
Includes:
(1) 2-Port DKM Modular Card Chassis
(1) Locking Power Cord
(1) Removal Tool for Cards
(1) Information/Documentation

Extender Type - KVM
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 41 F
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 25 Watt
Current Draw: 5 Amps
DC Voltage: 5 Volts
Depth: 7.20 in
Height: 1.70 in
Width: 8.70 in
Product Weight: 3.70 lbs
Warranty (Length/Type): 2 Years
Computer Interface: Dependent on Modular Cards
Distance (Maximum): 400 ft(140m) using solid conductor CATx cable, 200 ft(70m) using stranded conductor CATx cable, 32,800 ft(10,000m) using Singlemode 9µm fiber cable, 3,280 ft(1000m) using Multimode 50µm (OM3) cable, 1,300 ft(400m) using Multimode 50µm cable, 650 ft(200m) using Multimode 62.5µm cable
Leads Supported: Dependent on Modular Cards
LED Interface: (2) LEDs for status of power, RED LED = no power input, GREEN LED = power is present
Operating System Support: Dependent on Modular Cards
Storage Temperature: -13° to 140° F (-25 - 60° C)
Connectors: (1) IEC320 Main Power Inputs; (1) Locking 2.5mm x 5.5mm Barrel Connector (spare power input); (2) Onboard Connectors to Interface with TX/RX Cards; Output: IEC C14, 2.5mm x 5.5mm barrel redundant/spare

Extender 1794400 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

70m 10Gbps HDBaseT Extender Kit

by AVPro Edge

USB 3.2 Extender Over HDBaseT with USB-C

by Vanco International

70m 18Gbps HDBaseT Extender Kit

by AVPro Edge