277V 3-lamp Forward Throw Videoconference Fixture, Analog Ballast

Stealth-T fixtures are available with standard non-dim or a complete range of fully dimmable ballasts. For convenient maintenance, all components, including ballasts, are accessible from below the fixture through a spring-loaded louver frame that pulls down and then returns flush to the ceiling. For ultimate ease of installation, an optional installation kit includes a system of plug-in power/dimming connectors that makes it extremely simple for AV integrators and electrical contractors to finalize any Stealth-T installation.

Depending on the setting, Stealth-T fixtures can be used exclusively or in conjunction with strategically placed T-Series units. Either way, Brightline customers now have a dynamic new means of benefiting from the unmatched performance and reliability of the market’s most acclaimed videoconference lighting products.

Designed for installation in any ceiling with standard 2- x 2-ft (60- x 60-cm) panels, the Stealth-T measures less than 5 inches in height and employs two recyclable, custom-phosphor 55-W lamps. A combination of specially engineered aluminum louvers and frosted diffusion filters results in directional illumination that is soft and enveloping, and that can be entirely glare-free a major advantage in a classroom setting or in the relatively close confines of a telepresence suite. Louver options are interchangeable, and the different configurations 45°, bidirectional 45°, or vertical ensure accurate coverage of all potential on-camera positions in addition to fulfilling the requirements of general room task lighting.

Drawing on the company’s expertise in broadcast-quality, ceiling-mounted technology, the Stealth-T offers an unobtrusive, energy-efficient, and cost-effective complete lighting solution that is particularly well-suited for e-learning and telepresence applications.

Construction
Die-formed, cold-rolled steel housing. Aluminum louvers. Fixture can be used in a 24-in or 600-mm lay-in grid ceiling or cut into drywall or plaster.

Fixture Body Finish
Fixture body is painted with high-gloss, electrostatically applied white enamel finish. Louver and louver frame are painted with low-gloss, Easy-White finish (Tiger Drylac 449/11707 smooth flat).

Louver Frame
Die-cut, cold-rolled steel with four (4) pull-down spring latches. Louver frame can be removed from fixture without use of tools.

Ballast
High-frequency electronic ballast with a power factor > 90%, THD, 10%, and a Class A sound rating. Non-dim ballast is standard; a variety of dimming ballasts are available. Fixtures can be provided for operation on 120V, 230V, or 277V, 50-60 Hz.