Radio Frequency (RF) : RF Demodulators / Modulators : DekTec - DTE-3114

Quad QAM Modulator with IP Input

Series: Networked

Model: DTE-3114

Standalone four-channel QAM modulator with IP (TS-over-IP) inputs and RF output agile over the VHF and UHF band
Web and SNMP interface for controlling parameters and observing status
Unit can be powered via the Ethernet cable (Power over Ethernet) or through a DC power supply jack
Supports IP de-encapsulation and 2D FEC decoding according to SMPTE 2022-1/2
Removal of IP jitter with programmable size of jitter-tolerance buffer

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The four-channel QAM modulator with IP (TS-over-IP) inputs and RF output agile over the VHF and UHF band. The Web and SNMP interface for controlling parameters and observing status and powered via the Ethernet cable (Power over Ethernet) or through a DC power supply jack. Supports IP de-encapsulation and 2D FEC decoding according to SMPTE 2022-1/2 and LCD status display shows device identifier, bitrate, IP/MAC address and status.

Standalone four-channel QAM modulator with IP (TS-over-IP) inputs and RF output agile over the VHF and UHF band
Web and SNMP interface for controlling parameters and observing status
Unit can be powered via the Ethernet cable (Power over Ethernet) or through a DC power supply jack
Supports IP de-encapsulation and 2D FEC decoding according to SMPTE 2022-1/2
Removal of IP jitter with programmable size of jitter-tolerance buffer
LCD status display shows device identifier, bitrate, IP/MAC address and status
Install up to 12 modules in 3U 19" rack using the DekTec rack-mountable rail, or units can be mounted on a DIN rail directly on a wall
Applications
- Small-scale CATV networks
- Cable-network simulator
- QAM test-signal generator

Rackmountable - Yes
Spec Sheet available - Yes

Number of Channels: 4
Carrier Frequency 1: 1006000 kHz
Carrier Frequency 1: 1006000000 Hz
Carrier Frequency 1: 1.01 Ghz
Modulation Standard:
Output level (total): -32 to -9dBm
MER: 43dB
INPUT:
Protocols:
FEC: SMPTE 2022-1
JITTER TOLERANCE: 1 to 120ms

Modulator 119 kb - Data Sheet

Project List

Modulator 1222 kb - Other

Project List

Find a Dealer

Suggested Products

SI 30 - Two channel switchable/stereo IR transmitter (2.3/2.8 MHz), requires NT20-1-120 power supply (order separately), covers 750 sq ft (mono) or 375 sq ft (stereo) (9.0 oz)

by Sennheiser

SI 1015 - 2-channel IR remote control transmitter, broadband, 2 carrier frequencies (2.3 / 2.8 MHz), switchable 1/2/stereo, 2 x XLR, 1/2 19" / 1HE

by Sennheiser