The DSA250i represents a radical step forward for small to mid-sized permanent installation applications, simplifying EAW's revolutionary KF900/PPST technology that permits digital steering and aiming of an array's output, adapting it to applications where column loudspeakers would typically be specified. Each driver has its own individual amplification and digital signal processing (DSP), and using the DSA Pilot software program, vertical coverage pattern can be varied from 15° to 120° as well as aim the coverage ±30°.
2-Way, full-range loudspeaker for voice and music applications
Vertical coverage pattern adjustable to fit the audience area
Integral signal processing and amplification
Built-in electronic driver protection
Wall Mounting hardware included
8 x 4 in cone, direct radiating
8 x 1 in dome, horn-loaded
Installation
Foreground music & voice
Houses of worship, auditoriums, reverberant public spaces, ballrooms, corporate AV, live theatre, theme parks, classrooms, museums
Height:
50.80 in
Width:
9.30 in
Depth:
9.30 in
Product Weight:
84 lbs
Maximum Frequency Response (Bandwidth):
15 kHz
Maximum Frequency Response (Bandwidth):
15000 Hz
Minimum Frequency Response (Bandwidth):
78 Hz
Minimum Frequency Response (Bandwidth):
0.08 kHz
Coverage Horizontal:
120 degrees
AC Voltage:
115 Volts
Color:
White
Shipping Weight:
100 lbs
Impedance:
8 ohm
Number of Bands:
2
Sensitivity:
1.25 dBV
Operating Mode:
Self-Powered
Analog Amplifier Output (ea):
28.3 V, 50 W at 16 ohms
Input (Audio A and B):
Configuration Balanced Differential
Subsystem:
8x 4 in Cone (LF), 8x 1 in Cone (HF)
Input Routing:
A + B, A or B, priority B over A
Digital A to D/D to A:
48 kHz, 24 bit
Processor:
32 bit dual SHARC
Propagation Time:
4.3 ms
Compression Threshold:
-40 to +24 dBu
Compression Ratio:
1.2:1 to inf:1
Gain:
-60 to +10 dB
Signal Delay (maximum):
300 ms
Meters Input:
-40 to +20 dBu
Meters Output:
-30 to 0
Gain Reduction:
0 dB to -60 dB (compression)
AC Mains:
100 to 120 V at 50 to 60 Hz, 4 A
Connections:
EIA-485, optional CobraNet; AC (110 v - 240 v)
Rigging/Mounting:
Wall mount hardware, optional fly-bar kit