Power over HDBaseT: Features power extension from Tx to Rx,
Rx unit does not require power supply
HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic
adjustment of feedback, equalization, and amplification depending on
cabling length
Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling
Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6
UTP/STP cabling
Up to 250 ft. @ 1080p / 1920x1200 using KD-CAT6STP1X cabling
Up to 230 ft. @ 1080p / 1920x1200 using third-party CAT5e/6 UTP/STP
4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at
4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit
Audio De-Embedding: Audio from the HDMI input is de-embedded through the
Coax digital (PCM) and/or Analog L/R audio output
HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and
HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s
EDID Control: Internal library features 15 default EDID configurations and
native EDID data from Output/Display devices connected via Rx
Hot Plug Detection Control: Enables integrator to choose if active signal voltage is
forced to connected input devices
Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP
authentication with source & display, EDID Control handshake, and Hot Plug control
IR Sensor: Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight IR
from remote(s) without external IR connecting block
Up/Down IR: Two channels of IR enable control to/from devices connected
to Tx and Rx units
RS-232: Bi-Directional control to/from Tx and Rx unit on 3.5mm connector
Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as
connectivity status
3D: Support for standard 3D stereoscopic signal formats
Deep Color Support: 12bit Deep Color video / 8bit color for 4K/UHD
Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus
and DTS-HD Master Audio™
CEC Support: For inter-device control between main input and output HDMI channel
I2C Communication: EDID and HDCP authentication to Display and Source
Control System Support: Compatible with Compass Control®, AMX®, Control4®,
Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.