The Digitalinx DL-USB2 products will extend a high speed USB 2.0 signal (480Mbps) up to 100m (328ft). The modular extenders may be powered on either end for low power devices such as keyboards or mice. For remote devices which require more power, the client side extender will require to be powered. Uses any Cat5e/6/6A twisted pair cabling. Supplies 500mA to USB devices. Can also be used to extend USB 1.1 signals.
Extends USB high speed (480Mbps) up to 100m (330ft)
Powered from client side extender
Uses any Cat5e/6/6A twisted pair cabling
Supplies 500mA to USB devices
Can also be used to extend USB 1.1 signals
Painted aluminum enclosure
Applications:
Extending high-bandwidth USB devices, such as HD webcams
Plenum routing of USB signals
Extender Type - USB
ROHS Compliant - Yes
Warranty - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
Transmission Range:
328 ft
Certifications:
CE, FCC
AC Voltage (Maximum):
240 Volts
AC Voltage (Minimum):
100 Volts
Active Power:
4.30 Watt
Current Draw:
2 Amps
DC Voltage:
5 Volts
Depth:
0.83 in
Height:
1.81 in
Width:
1.57 in
Shipping Weight:
0.66 lbs
Warranty (Length/Type):
2 Years
I/O Connections:
USB: One (1) USB Type A
Twisted Pair: One (1) 8P8C port (Shielded RJ45)
5V DC Power: One (1) Barrel (5.5 mm OD; 2.1 mm ID) on 100mm (3.94 in) whip
Supported Signals:
USB 2.0: Low Speed (1.5 Mbps), Full Speed (12 Mbps), and Hi-Speed (480 Mbps)
USB 1.1: Low Speed (1.5 Mbps) and Full Speed (12 Mbps)
Extender Characteristics: Cable Requirements: Category 5e, 6, or 6A with TIA/EIA-568B crimp pattern
Chassis and Environmental:
Enclosure: Painted Aluminum
Operating Humidity: 20% to 90%, Non-condensing
Storage Temperature: -10° to +60° C (+14° to +140° F)