Radio Frequency (RF) : RF Demodulators / Modulators : Thor Fiber - H-IPRF

IPTV to Encrypted RF QAM/ATSC Modulator

Model: H-IPRF

IPTV Modulator module outputs 8 scrambling or clear CATV RF QAM or ATSC channels
IPTV Modulator modules inputs up to 256 SMPTS TS streams or 8 MPTS's
Chassis with 3 modules will input 768 SMPTS's/24 MPTS's IPTV streams and output a total of 24 Encrypted or clear QAM/ATSC HD Channels
Chassis with 9 modules will input 2304 SMPTS's/72 MPTS's IPTV streams and output a total of 72 Encrypted or clear QAM/ATSC HD channels
High density clear QAM modulator system for IP to RF

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Thor part number H-IPRF systems are high density card based modulator chassis. Card bays support T108 modulator cards with two independent systems per card, each with 4x adjacent QAM-256 outputs and 5 UDP IP addresses and ports. Each IP input can support MPTS inputs up to 108 Mbps, with the total input per Gigabit Ethernet port having a maximum aggregate program stream input up to 870 Mbps. This capacity allows the 3024 chassis to modulate up to 96 HD programs per chassis, or up to 400 SD programs when properly configured on QAM-256. The front panel has keyed switches for both power supply units, as well as a toggle for the alarm system. When armed, the unit will emit an audible alarm tone when an alarm event such as a lost video input is detected. The mainboard in the chassis includes a high capacity TS multiplexer that is able to route programs from one input card to another. This allows any input on any card to be dynamically remapped in any arrangement to any output configuration. This provides full matrix routing of all programs for cherry picking custom lineups for the RF outputs. Thor H-IPRF systems are the highest density digital channel modulators available. This platform is ideal for corporate MATV and hospitality industries.

IPTV Modulator module outputs 8 scrambling or clear CATV RF QAM or ATSC channels
IPTV Modulator modules inputs up to 256 SMPTS TS streams or 8 MPTS's
Chassis with 3 modules will input 768 SMPTS's/24 MPTS's IPTV streams and output a total of 24 Encrypted or clear QAM/ATSC HD Channels
Chassis with 9 modules will input 2304 SMPTS's/72 MPTS's IPTV streams and output a total of 72 Encrypted or clear QAM/ATSC HD channels
High density clear QAM modulator system for IP to RF
Each card supports 2 independent systems, dual power supplies
8 Full QAM-256 outputs per card in two groups of 4 adjacent channels
Every 4 adjacent RF carriers independently managed system
Supports worldwide DVB standards - QAM, 8VSB, DVB-T, DVB-C and ISDB-T
Front panel indicators for alarm status and system event errors
IP Input for use with IPTV Media Servers and Internet CDN Services
Assign up to 30x IP address port for 3 card, up to 120x IP for 12 card

Transmission Range: 1.48 ft
Bandwidth: 0 Hz
Bandwidth: 0 kHz
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 20 Watt
Depth: 17.32 in
Height: 1.73 in
Width: 24.80 in
Product Weight: 20.94 lbs

H-IPRF-16ATSC - 16-channel IPTV to RF Agile ATSC Edge Modulator

H-IPRF-16DVBT - 16-channel IPTV to RF Agile DVB-T Edge Modulator

H-IPRF-16QAM - 16-channel IPTV to RF Agile QAM Edge Modulator

H-IPRF-32ATSC - 32-channel IPTV to RF Agile ATSC Edge Modulator

H-IPRF-32DVBT - 32-channel IPTV to RF Agile DVB-T Edge Modulator

H-IPRF-32QAM - 32-channel IPTV to RF Agile QAM Edge Modulator

Find a Dealer

Suggested Products

SI 30 - Two channel switchable/stereo IR transmitter (2.3/2.8 MHz), requires NT20-1-120 power supply (order separately), covers 750 sq ft (mono) or 375 sq ft (stereo) (9.0 oz)

by Sennheiser

SI 1015 - 2-channel IR remote control transmitter, broadband, 2 carrier frequencies (2.3 / 2.8 MHz), switchable 1/2/stereo, 2 x XLR, 1/2 19" / 1HE

by Sennheiser